PORTED LS2 Intake..... whats your thoughts
Thread Starter
On The Tree
iTrader: (1)
Joined: Nov 2005
Posts: 171
Likes: 0
From: Fort Dix, Dirty Jerzey
PORTED LS2 Intake..... whats your thoughts I got a good deal on an LS2 intake and I'm going to have it ported... and go with a Ported TB.... what do you guys think about this over a LS6 intake... I currently have a LS1 with Heads and Cam
Junk. LS2 gets real thin inside when ported...which supposedly disrupts airflow, and they leak between the runners. There is a big thread discussing this...if I had it handy, I would post it for you. Go with the LS6, or save for the FAST.
Then again, there are plenty who claim otherwise. Either way, the LS2 requires a different tb, fuel rails, and injectors...=more money.
Edit: https://ls1tech.com/forums/generatio...e-cutaway.html
https://ls1tech.com/forums/generatio...-intake-2.html
Then again, there are plenty who claim otherwise. Either way, the LS2 requires a different tb, fuel rails, and injectors...=more money.
Edit: https://ls1tech.com/forums/generatio...e-cutaway.html
https://ls1tech.com/forums/generatio...-intake-2.html
Last edited by fast377; Feb 10, 2009 at 09:56 PM.
Thread Starter
On The Tree
iTrader: (1)
Joined: Nov 2005
Posts: 171
Likes: 0
From: Fort Dix, Dirty Jerzey
Thanks for the Info.... that is a good thread... I got the whole intake with TB for 200 with fuel rails so you can't really beat that.. So I guess I got to put it down and try it
