228/228 cam with .558 lift what springs ?
#1
TECH Apprentice
Thread Starter
iTrader: (23)
Join Date: Mar 2007
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
228/228 cam with .558 lift what springs ?
like tittle says what spring set up to i need .. unless i can run stock springs but im sure i cant ..
what lift will stock springs be no good at ?
will zo6 heads with springs have enough lift for this cam ?
thanks for the info and i anyone has cheap ones for sale let me knw .
what lift will stock springs be no good at ?
will zo6 heads with springs have enough lift for this cam ?
thanks for the info and i anyone has cheap ones for sale let me knw .
#2
LS1Tech Sponsor
iTrader: (14)
We have the Z06 springs for sale all day at $57. Those should be good to .570 or so. If you want a better spring than that, we offer the PAC springs (SDL1600VS) at 122.95. They are good til about .610ish, but I would not go over that.
Last edited by Beau@SDPC; 02-13-2009 at 06:02 PM.
Trending Topics
#15
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 81 Likes
on
72 Posts
the PAC 1518s are good to .650 IIRC. are you suggesting that wouldn't be good idea either? curious bc im still learning about some of these details....
#16
LS1Tech Sponsor
iTrader: (14)
I have not looked at them, but we have seen some problems like valve float happen when you go too much lift, ie over 610 on the pacs we have. I would def look at spring pressure on those over 6xx and see if they are adequate like alot of the higher pressure springs are. That is the most crucial part.