Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Cam help

Old Mar 9, 2009 | 06:24 PM
  #1  
STK85's Avatar
Thread Starter
On The Tree
iTrader: (5)
 
Joined: Apr 2005
Posts: 181
Likes: 0
From: Sacramento, CA
Default Cam help

I deciding what cam to go with, The car is see only street no track. current mods are bolts on with a 4000ss. Suggestions? Ive been looking at the following
TR230 112
TR230/336 112
MTI X1

What do you guys suggest? What kinda numbers are you putting down thanks.
Reply
Old Mar 9, 2009 | 08:30 PM
  #2  
conan's Avatar
TECH Senior Member
20 Year Member
iTrader: (5)
 
Joined: May 2004
Posts: 6,492
Likes: 6
From: Back in the Burg
Default

I vote tr230/236 112lsa. If you had a 6 speed you would be in the 400 rwhp range the a4 will probly be alittle lower.
Reply
Old Mar 10, 2009 | 08:20 AM
  #3  
STK85's Avatar
Thread Starter
On The Tree
iTrader: (5)
 
Joined: Apr 2005
Posts: 181
Likes: 0
From: Sacramento, CA
Default

thanks. What do you guys think...TR230/336 112 or the MTI X1? for a stalled auto?
Reply
Old Mar 10, 2009 | 04:47 PM
  #4  
HTX's Avatar
HTX
TECH Regular
iTrader: (1)
 
Joined: Sep 2006
Posts: 495
Likes: 0
Default

all of those are good cams. I would go with one of the ThunderRacing cams. the TR230 is going to be mre streetable than the 230236 however will not produce as much top end power. so do you want top end or low end?

with full boltons either one of those cams are worth at least 30-40 rwhp
Reply
Old Mar 10, 2009 | 05:07 PM
  #5  
TXZ28LS1's Avatar
TECH Senior Member
iTrader: (5)
 
Joined: Mar 2004
Posts: 6,163
Likes: 3
From: Classified
Default

mti x1 and a vig 3200 stall i put down 395rwhp without a pulley on stock heads.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:29 AM.