LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Generation III Internal Engine
Newb on heads cam

Generation III Internal Engine 1997-2006 LS1 | LS6

Sponsored by:

Newb on heads cam

Reply Subscribe

Search this Thread

Old

Jun 21, 2009 | 03:34 PM

#1

Thread Starter

Teching In

Joined: Sep 2007

Posts: 40

Likes: 0

Default

Newb on heads cam

I was looking at the heads cam package which consisted of TorquerV3 cam and PRC stage 2.5 ls6 heads can anyone tell me how good this setup is on the street? My car is not a dd and its a m6.

Old

Jun 21, 2009 | 06:21 PM

#2

TECH Enthusiast

iTrader: (4)

Joined: Sep 2003

Posts: 701

Likes: 0

From: Rogers, Ark.

Default

Quote:

Originally Posted by chevguy86

I was looking at the heads cam package which consisted of TorquerV3 cam and PRC stage 2.5 ls6 heads can anyone tell me how good this setup is on the street? My car is not a dd and its a m6.

Depending on what supporting mods you have, you should have no problems with a decent tune getting 420-440rwhp.. What are your plans/expectations for the car? You will lose some drivability with that setup..

Misc. links for reference:
https://ls1tech.com/forums/dynamomet...3-90-90-a.html
https://ls1tech.com/forums/dynamomet...uer-v-3-a.html
https://ls1tech.com/forums/generatio...uer-v-3-a.html

Last edited by John02Hawk; Jun 21, 2009 at 06:33 PM.

Old

Jun 21, 2009 | 06:30 PM

#3

Thread Starter

Teching In

Joined: Sep 2007

Posts: 40

Likes: 0

Default

I have SLP lts and tds ptb and plan on doing a ls6 intake how much drivability are we talking about?

Old

Jun 21, 2009 | 06:43 PM

#4

TECH Enthusiast

iTrader: (4)

Joined: Sep 2003

Posts: 701

Likes: 0

From: Rogers, Ark.

Default

Quote:

2300-6700 RPM Power Band with a peak around 6400rpm; This is an excellent performance camshaft with a rough idle!

http://www.texas-speed.com/shop/item...d=669&catid=44

Even with an awesome tuner, you will lose drivability at low RPMs. EX: Cruise control at 75MPH in 6th gear..

With your car not being a DD, I wouldn't worry too much about it..

Read this: https://ls1tech.com/forums/generatio...-v2-vs-v3.html

Old

Jun 21, 2009 | 06:59 PM

#5

Thread Starter

Teching In

Joined: Sep 2007

Posts: 40

Likes: 0

Default

How bad will drivability be if i install the v3

Old

Jun 22, 2009 | 07:26 AM

#6

TECH Senior Member

iTrader: (42)

Joined: Jul 2003

Posts: 7,067

Likes: 9

From: HOT'LANA, GAWJA

Default

You and that cam will not be happy campers unless you run 4.10 gears with it...

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 11:29 AM.