Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Timing chain and gears

Thread Tools
 
Search this Thread
 
Old Jun 22, 2009 | 08:29 AM
  #1  
datz kool's Avatar
Thread Starter
Teching In
 
Joined: Jan 2009
Posts: 19
Likes: 0
Default Timing chain and gears

At what mileage should an ls motors timing chain be replaced.
And whats a good replacement chain.I might be ready for one,car has over 50 thousand miles on it.
Just looking to keep it safe.

thanks......
Reply
Old Jun 22, 2009 | 08:52 AM
  #2  
eseibel67's Avatar
TECH Fanatic
15 Year Member
Photogenic
iTrader: (10)
 
Joined: Feb 2008
Posts: 1,781
Likes: 4
From: Kitchener, ON
Default

Gears will last forever.

At 50K, you're chain is likely still o.k.

When the time comes, LS2 chain has thicker links, is a direct fit on the stock gears, and can be had from SDPC for $40.
Reply
Old Jun 22, 2009 | 09:00 AM
  #3  
datz kool's Avatar
Thread Starter
Teching In
 
Joined: Jan 2009
Posts: 19
Likes: 0
Default

Thanks, I will look into the ls2 chain. For 40 bucks its good insurance.
Reply
Old Jun 22, 2009 | 09:12 AM
  #4  
wicknewman's Avatar
On The Tree
15 Year Member
iTrader: (13)
 
Joined: Aug 2006
Posts: 164
Likes: 5
From: Schertz, TX
Default

Well, if you are going to the swap the timing chain out you may as well put in a cam . It will be right there and you have done almost all the work to get to it. Scoggin Dickey has a good selection of those as well.
Reply
Old Jun 22, 2009 | 09:18 AM
  #5  
datz kool's Avatar
Thread Starter
Teching In
 
Joined: Jan 2009
Posts: 19
Likes: 0
Default

[QUOTE=wicknewman]Well, if you are going to the swap the timing chain out you may as well put in a cam . It will be right there and you have done almost all the work to get to it. Scoggin Dickey has a good selection of those as well.

Please dont tempt me The motors only a baby stopped making power at 5800 rpm. Damn slowhawk - mustang dyno
Reply
Old Jun 22, 2009 | 09:29 AM
  #6  
wicknewman's Avatar
On The Tree
15 Year Member
iTrader: (13)
 
Joined: Aug 2006
Posts: 164
Likes: 5
From: Schertz, TX
Default

You are only giving yourself more reason to do it by saying that.
Reply
Old Jun 22, 2009 | 04:39 PM
  #7  
01ssreda4's Avatar
TECH Senior Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (96)
 
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Default

i say swap it at 50k. its cheap insurance.
Reply
Old Jun 23, 2009 | 02:01 PM
  #8  
SKI's Avatar
SKI
11 Second Club
iTrader: (9)
 
Joined: Jun 2005
Posts: 202
Likes: 0
Default

Good for a 100+ miles.....
Reply
Old Jun 23, 2009 | 02:20 PM
  #9  
02*C5's Avatar
TECH Fanatic
15 Year Member
iTrader: (1)
 
Joined: Apr 2009
Posts: 1,704
Likes: 303
From: Az
Default

if stock 100k if work done (ie head/cam) I would say 50K after the job. Specially if your shifting points are now between 6500-6800 on a LS1/6800-7200 LS2/LS3
Reply




All times are GMT -5. The time now is 05:23 PM.