super 7 valve locks work on stock valves?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well im looking to do another cam swap and was wondering if the super 7 valve locks that come with the patriot xtreme .660 lift spring and titanium retainer kit work with stock heads and valves. I also noticed the prc spring kit has the 10 degree locks. Which one do you guys think i should go with?
Trending Topics
#8
LS1Tech Premium Sponsor
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The super 7 lock will work fine with the proper retainer. The PRC spring kits don't use a aftermarket lock because we've never had one failure from stock locks. I've seen super 7 locks broken apart & I took the approach don't fix what isn't broken.
The PRC spring kit now uses a completely redesigned spring compared to the Patriot spring kit or the old PRC kits. We've updated the PRC kits to promote a longer spring life as well as better pressures!! For equal money the PRC kit is a complete no brainer when compared to the competitors spring kits!
The PRC spring kit now uses a completely redesigned spring compared to the Patriot spring kit or the old PRC kits. We've updated the PRC kits to promote a longer spring life as well as better pressures!! For equal money the PRC kit is a complete no brainer when compared to the competitors spring kits!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com