Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

pushing coolant help!

Thread Tools
 
Search this Thread
 
Old Aug 9, 2009 | 01:02 PM
  #21  
99RTA's Avatar
Banned
iTrader: (-1)
 
Joined: Apr 2009
Posts: 250
Likes: 1
Default

Yes the cap could have fixed it!
Reply
Old Aug 9, 2009 | 01:09 PM
  #22  
99RTA's Avatar
Banned
iTrader: (-1)
 
Joined: Apr 2009
Posts: 250
Likes: 1
Default

Originally Posted by LS6427
You just baught the car? Sounds like the engine may have blown head gasket(s).

Short of doing a leakdown check....I would remove the t-stat, start the engine while cold and top off the coolant, go for a drive. If it still boils over when you come back from a 30 minute drive....gaskets are most likely what it is.

It could also be something caught up in front of the condensor, making it run hot as *****, then the coolant sprays out the over-flow, then the air in the system later on boils over. But you did say your temp guage always looked good. You could have a bad temp sensor too.


.
maybe you could suggest a few more things? LMAO where do you come up with this stuff?????
Reply




All times are GMT -5. The time now is 10:46 PM.