Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

lq4 6.0 +TSP Tsunami cam + 243

Thread Tools
 
Search this Thread
 
Old 08-01-2009 | 02:01 PM
  #21  
TX RED's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 1,049
Likes: 0
From: Edinburg TX
Default

gm parts direct has the ls3 heads shipped for 500. can I still use my springs on ls3 heads
Old 08-01-2009 | 02:14 PM
  #22  
98blueSScamaro's Avatar
11 Second Club

iTrader: (14)
 
Joined: May 2007
Posts: 1,660
Likes: 0
From: Aurora IL
Default

Originally Posted by TX RED
gm parts direct has the ls3 heads shipped for 500. can I still use my springs on ls3 heads
yes but check seat pres before using them
Old 08-02-2009 | 02:48 PM
  #23  
TX RED's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 1,049
Likes: 0
From: Edinburg TX
Default

Ok are the ls3 rocker arms diff ? Do they have an offset?
Old 08-02-2009 | 08:22 PM
  #24  
nissan owner's Avatar
Teching In
iTrader: (1)
 
Joined: Feb 2008
Posts: 42
Likes: 0
From: Perris, CA
Default

Originally Posted by TX RED
gm parts direct has the ls3 heads shipped for 500. can I still use my springs on ls3 heads
Do you have a link? I couldn't find them...I would really appreciate any help.
Old 08-02-2009 | 10:27 PM
  #25  
TX RED's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 1,049
Likes: 0
From: Edinburg TX
Default

http://www.gmpartsdirect.com/catalog/frameset.cfm
Old 08-02-2009 | 10:42 PM
  #26  
nissan owner's Avatar
Teching In
iTrader: (1)
 
Joined: Feb 2008
Posts: 42
Likes: 0
From: Perris, CA
Default

Do you have the part number?
Old 08-02-2009 | 11:37 PM
  #27  
TX RED's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 1,049
Likes: 0
From: Edinburg TX
Default

*12615361

Engine Cylinder Head
I think it's the left it won't give both
Old 08-03-2009 | 12:34 AM
  #28  
nissan owner's Avatar
Teching In
iTrader: (1)
 
Joined: Feb 2008
Posts: 42
Likes: 0
From: Perris, CA
Default

Originally Posted by TX RED
*12615361

Engine Cylinder Head
I think it's the left it won't give both
Sorry to kind of mess up your thread but thanks for the info...So what else would be needed to run the heads...does it come with the whole valvetrain? Or what is needed to make it work...
Old 08-03-2009 | 02:15 AM
  #29  
TX RED's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 1,049
Likes: 0
From: Edinburg TX
Default

From what I have seen the valvetrain is diff.
Old 08-03-2009 | 04:55 AM
  #30  
Devils Mentor's Avatar
Banned
iTrader: (20)
 
Joined: Apr 2009
Posts: 1,120
Likes: 0
From: Inside Your Girlfriend
Default

BUMP!

Looking into a LQ4/9 with a L92 top so I figure this will be a good follow

DM
Old 08-03-2009 | 01:32 PM
  #31  
TX RED's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 1,049
Likes: 0
From: Edinburg TX
Default

this what i found
http://www.gmhightechperformance.com.../photo_07.html

looks like it's only on the intake side,exhaust rocker stays the same from the ls2
Old 08-03-2009 | 03:56 PM
  #32  
nissan owner's Avatar
Teching In
iTrader: (1)
 
Joined: Feb 2008
Posts: 42
Likes: 0
From: Perris, CA
Default

Originally Posted by TX RED
From what I have seen the valvetrain is diff.
so inorder to get those heads, i would have to buy springs, retainers, rocker arms?
Old 08-04-2009 | 01:56 AM
  #33  
TX RED's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 1,049
Likes: 0
From: Edinburg TX
Default

Ya think so, I priced it all out. I'am just going to wait and find some used heads with the valvetrain
Old 08-04-2009 | 03:47 AM
  #34  
Soul TKR's Avatar
TECH Junkie

iTrader: (4)
 
Joined: Jun 2004
Posts: 3,543
Likes: 2
From: San Diego, CA
Default

I'm making about 450rwhp with a lil ole 224r cam in my LQ4

still got a stock throttle body and one of those hated on BBK SSI Intakes as well
Old 08-04-2009 | 11:21 AM
  #35  
TX RED's Avatar
Thread Starter
11 Second Club

iTrader: (19)
 
Joined: Jan 2005
Posts: 1,049
Likes: 0
From: Edinburg TX
Default

damn those are some good numbers.. hope to be there mabye a bit more. not going with big cam anymore going witha custom girnd. looks like ls3 heads like small cams too and make big power

Last edited by TX RED; 08-04-2009 at 11:29 AM.
Old 08-04-2009 | 02:28 PM
  #36  
Soul TKR's Avatar
TECH Junkie

iTrader: (4)
 
Joined: Jun 2004
Posts: 3,543
Likes: 2
From: San Diego, CA
Default

Originally Posted by TX RED
damn those are some good numbers.. hope to be there mabye a bit more. not going with big cam anymore going witha custom girnd. looks like ls3 heads like small cams too and make big power
all I can say is AFR!!!!!!!!!!

i really really feel that those are what made me hit those numbers... i mean really, look at the rest of my mods. Those are the part of my build with the most potential to produce hp...
Old 08-22-2009 | 02:59 PM
  #37  
nightmare23's Avatar
11 Second Club
iTrader: (5)
 
Joined: Feb 2008
Posts: 198
Likes: 0
Default

tx red ... get the lq4 l92 heads 90/90 set up f14 cam ....
Old 01-10-2021 | 03:15 AM
  #38  
Dustin Skinner's Avatar
Teching In
 
Joined: Jan 2021
Posts: 2
Likes: 0
Default Did you ever see what numbers it made?

Originally Posted by TX RED
damn those are some good numbers.. hope to be there mabye a bit more. not going with big cam anymore going witha custom girnd. looks like ls3 heads like small cams too and make big power
I’m building the basic same combo. Tsunami v2 Dual springs 243 heads trunnion upgraded hew performance hydraulic roller lifers and the holly high ram intake Just curious what numbers yall made with this set up
Old 01-10-2021 | 12:29 PM
  #39  
G Atsma's Avatar
TECH Senior Member
5 Year Member
 
Joined: Jun 2016
Posts: 21,587
Likes: 3,301
From: Central Cal.
Default

TX RED hasn't been here for almost 3 years.



Quick Reply: lq4 6.0 +TSP Tsunami cam + 243



All times are GMT -5. The time now is 07:17 AM.