Unfamilar cam with stock heads sets Vette A4 1/4 record with 10 sec ets via bolt ons!
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Elmhurst, IL (Chicago Suburb)
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
Unfamilar cam with stock heads sets Vette A4 1/4 record with 10 sec ets via bolt ons!
This just in!!!!! A HUGE CONGRATS to Corvette forum member RC White who just ran 10.86 at 123+ on his 02 A4 C5 cam only with stock heads and aggressive bolts on with Yank PT 4000 stall (same one i'm running in my 427) with the following cam which has not had much recognition yet but will sure will get ALOT of PEOPLES ATTENTION. This was run at HALSVILLE TEXAS track and here is some more info below. This is the by far the FASTEST Stock/cubed bottom end C5 A4 on the corvetteforum and has shattered any other 60 ft times, ets and mph BY FAR!!!! ALSO, this is the first and one and only A4 C5 that has run into the 10s with stock cubes/bottom end on the vette forum and this was done on stock lS1 heads and no other C5 stock cubed A4 has gone into the 10s including all HEADS and CAM A4 C5s!!! May have to look into this bad boy CAM for my 03 Z06!!!! Oh yeah, and i have ZERO CONNECTION or ANY AFFILIATION with (MMT) but just like sharing this great info with the HARDCORE LS1/6 GEARHEAD CROWD ALSO, he is running 3.90 gears!
HERE IS THE INFO AND CAM SPECS!!!!!: (228/234 607/598 110 +2) on the street and the track since we got it and now with the PT4000 on it around town, it is very streetable, assuming you do not mind an idle at 875-900 rpm's and the Harley type lope. I kinda like it now and if you want to get attention at a stoplight or gas station, this is for you.
But it does perform at the track, which is where we are interested in using it.
_______
Roger White
*2002 Black C5 A4
* 10.867 @ 123.04 Quickest cam_only car for now....(11/28/03)
http://www.mmtracing.com
* Modern Musclecar Technologies M2 Cam, Cam_Only
HERE IS THE INFO AND CAM SPECS!!!!!: (228/234 607/598 110 +2) on the street and the track since we got it and now with the PT4000 on it around town, it is very streetable, assuming you do not mind an idle at 875-900 rpm's and the Harley type lope. I kinda like it now and if you want to get attention at a stoplight or gas station, this is for you.
But it does perform at the track, which is where we are interested in using it.
_______
Roger White
*2002 Black C5 A4
* 10.867 @ 123.04 Quickest cam_only car for now....(11/28/03)
http://www.mmtracing.com
* Modern Musclecar Technologies M2 Cam, Cam_Only
Last edited by MTI 427 C5 Roadster; 11-29-2003 at 06:42 PM.
#4
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Elmhurst, IL (Chicago Suburb)
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
YOUR RIGHT. BOne stock he ran 12.73 at 109 and that is definitely a factory freak. I think he is content right now on running the stock heads for now (don't blame him) given the fact that this C5 is freak of nature.
ALSO, he back up these runs with 4 or 5 other high 10 sec. pases and the 2000DA Texas air OBVIOUSLY helped out quite a bit!
ALSO, he back up these runs with 4 or 5 other high 10 sec. pases and the 2000DA Texas air OBVIOUSLY helped out quite a bit!
#5
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Elmhurst, IL (Chicago Suburb)
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
I an pretty sure this is a full normal weight C5 which he drives all the time in town, etc. and almost certain running full interior, etc. which would make the car weigh around 3250/3300 lbs or so!
#7
LS1TECH Sponsor
iTrader: (2)
great #'s...both stock & modded...are you sure those arent stock ls6 heads on that car?...with those #'s lift wise id like to know whos springs hes runnin too hehe...looks like Im gonna go with a big cam...i wonder if having mine on a 110+2 would idle fine at 900rpms? hmmm auto on a 110 sure would sound nasty
lata
Bill
lata
Bill