JaSSon

iTrader: (11)

With everything the same which is gonna get it done. Im going to add PP 5.3s also with mods in sig. Would like to hear from people with similar setup.

JoSeY

10's here w/my MTI heads and X1, 4000 Vig, 323's...see sig...High high 10's....and I had all my seats and stuff out the car...but none the less. I can regularly pull 6.9's in the 1/8th (Don't have to let out at Sealy...hehe)

Colonel

TR 230/224 .575/.563 111

MTI 230/227 .591/.571 112

There's not enough difference between the two to matter much. The MTI cam is just a little more aggressive so I'd say the slight edge would go to it at the track assuming the heads flow well enough to take advantage of the higher lifts.

Cal

iTrader: (1)

I'd go with the TR230 to save some wear and tear on springs.

JoSeY

if you get a good set of manleys spring life won't be a big concern

jrp

iTrader: (16)

agreed with Colonel

JoSeY

If you want a choppy idle do not get the X1...it idles like a 222/222 type cam....it's a very tame idle...once you hit 2500 or so tho...LOOOOOOOK OOOOUUUUTTTTT

jrp

iTrader: (16)

thats what i've heard but it does have a 112lsa :dunno:

JoSeY

I DO KNOW...I have one....it doesn't have a choppy Idle.....

JoSeY

hehe....I was very suprised...I actually bitched at Jayson about it thinking he gave me the wrong One....but nope...the X1 just idles like that...very very good BIG SLEEPER cam.

jrp

iTrader: (16)

i know you have one, i can read sigs . i said :dunno: because most 112lsa cams i've heard have a very nice lope to it but alot the the x1 guys i know say it doesnt sound that lopey.

Cal

iTrader: (1)

Idle quality is somewhat subjective and can vary a lot based on the PCM tune you have.

JoSeY

Then make sure you ask for the choppy idle tune....need to go back to Jayson and get him to chop mine up a bit huh....

jrp

iTrader: (16)

true.

JaSSon

iTrader: (11)

X1 sounds good to me. Thanks

JoSeY

Sounds good to me too, but I'm just forwarning folks that think they're gonna get a choppy idle outta this thing that it might not be what they're lookin for

JaSSon

iTrader: (11)

The idle doesnt concern me. My buddy has an X1 on 114 and it sounds fine to me. Dont chop like TR224 but you know its there. I just want more e.t. Later

Chicago Crew UnderBoss

iTrader: (1)

I am sure the X1 can be tuned to be a little bit choppy if that is what one preferred!

Damian

iTrader: (89)

Either of these cams will be within 3-5 HP of each other. Not a big enough difference to really worry about. Find which one will give you the best deal and run it.

josh

JaSSon

iTrader: (11)

Best deal looks like MTI Their selling them for 399.99 and Thunder wants 459.99. Kinda suxs cause I normally buy stuff from Thunder.