I'm in the middle and need some torque specs before I start to put everything back together.

Engine cover bolts
Cam bolts
Rocker bolts
Spark plugs
Valve cover bolts
Coil rail bolts
Water pump bolts

Thanks

 

check out install university or ls1howto.com

All I know is rockers are 22ftlbs, or 24 if you use YTs. The rest I just go by snug +1/4 turn. Never had a problem.

 

http://www.ls1howto.com/index.php?article=23

 

here are some torque specs listed in the ls1/ls6 peformance book.

engine front cover bolts: 18
engine rear cover bolts: 18
camshaft retainer bolts: 18 lb/ft
camshaft sensor bolt: 18
camshaft sprocket bolts: 26
valve rocker arm bolts: 22
valve rocker arm cover bolts: 106 inch/lbs
spark plugs (cylinder head new): 15
spark plugs (all subsequent installations): 11
water pump bolts (first pass): 11
water pump bolts (final pass): 22
water pump cover bolts: 11
water pump pulley bolts (first pass): 89 inch/lbs
water pump pulley bolts (final pass): 18

for the rest you can talk to eboggs_jkvl on ls1.com (not sure if he posts on here) but i hope that helps