Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Got my 228r cam kit from tsp!!!!!!

Thread Tools
 
Search this Thread
 
Old 05-01-2010, 07:14 PM
  #21  
TECH Senior Member
 
garygnu's Avatar
 
Join Date: Feb 2009
Posts: 5,446
Received 4 Likes on 4 Posts

Default

get a good quality stall and suspension components. a properly set up suspension and a good stall with reduce E.T.by .5 second. reduce your 60 fts ,win the race.
Old 05-01-2010, 09:52 PM
  #22  
Launching!
Thread Starter
iTrader: (4)
 
98z28jorge's Avatar
 
Join Date: May 2009
Posts: 264
Received 0 Likes on 0 Posts

Default

Im going to get the circle d 3200 stall 278mm-11'' converter is that a good enough converter?? Im kinda on a budget and thats what i can afford for right now
Old 05-01-2010, 10:24 PM
  #23  
On The Tree
iTrader: (2)
 
redws618's Avatar
 
Join Date: Aug 2009
Location: Mesquite TX
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by massconfusion
i have the 228r cam with pat ls6 59cc heads, weiand intake with a fast 90mm, Lts, lid and 2.5 inch exhaust and a m6. My best time was 13.4 at 107 mph with a 2.2 60 ft time and .8 reaction time. this was also my very first pass so you can tell i should have seen mid 12's just based off of my trap speed and shitty reaction. I have .3 rts now but that with a bad clutch. Ethier way with your stall you will easily see 12's. I now have an 8.8 with 4.10s and a stage four monster so i am hoping to see low 12's maybe high 11's. Soon comes the spray. surge is very minimal as well very good cam i tuned it my self
Your reaction time doesn't matter, it starts when you cross their beam on the tree.
Old 05-01-2010, 10:33 PM
  #24  
11 Second Club
iTrader: (19)
 
Goat2NV's Avatar
 
Join Date: Jun 2007
Location: Bowie, Maryland
Posts: 247
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by 98z28jorge
Hey thanks guys the reason im consernd with my time is because my friend has a foxbody with a little head and cam package and he is runing a best of 7.7s in the 1/8th on mickey drs and he swears i cant even get close to him with a cam only set up he thinks i wont even be in the low 8s thats why im interested in finding out if i would even be able to give him a good race

oh and yes im going to up my 2.73 to 3.42s or maybe 3.73s

You'll go low 8s without a problem, my car with no cam, LS1 intake and 2.73 goes consistant 8.11-8.20s and its been a best of 7.90
Old 05-02-2010, 12:35 PM
  #25  
TECH Apprentice
iTrader: (6)
 
94dragbird's Avatar
 
Join Date: Jul 2008
Location: Ottumwa, IA
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 98z28jorge
Hey thanks guys the reason im consernd with my time is because my friend has a foxbody with a little head and cam package and he is runing a best of 7.7s in the 1/8th on mickey drs and he swears i cant even get close to him with a cam only set up he thinks i wont even be in the low 8s thats why im interested in finding out if i would even be able to give him a good race

oh and yes im going to up my 2.73 to 3.42s or maybe 3.73s
My buddy ran an 8.24 with ebay long tubes, flowmaster welded in the stock catback, slp lid and a predator handheld.... shortly after his tranny died and this was on street tires. He's looking for high 7's with new tranny, ss3600 and sticky tires.



Quick Reply: Got my 228r cam kit from tsp!!!!!!



All times are GMT -5. The time now is 03:27 PM.