Calling pat g
#2
#6
Staging Lane
iTrader: (7)
Join Date: Sep 2008
Location: Ennis, TX
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Did you fill out the Form? If not find his website, and select motorsports, everything you need is there. If you already did all this, send him an email to remind him (he is a busy man).
#12
Staging Lane
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
hahahahahaahahah not pat g the goddes of cam shafts. lol bahbahahahahaha Is eps pretty good? just looking for a cam to put in a 6.0 for a 1800 lb mud truck/ gutted s10turbo 350/35 inch cut bogger and alottttt of spray. We only run 200 ft so trying to get all i can out of it. I own a trans am with heads cam etc and 275 worth of nitrous lol. It has a ms3 in it and the cam is awsome just dont think that it will work because it doesnt start to ride until up stairs but on gas its hell. texas speed wasnt much help just told me to put a torquer in it.. had one of those and was pretty much ****. car sped up half a second a quarter on hp and 8 tenths on nitrous. same heads and bottom end both tuned by me. Mess around and put a wooden cam shaft in it and shower down on 300 on that fogger with about 14 degrees of timing ))) thanks alot to all that have helped
#15
TECH Resident
iTrader: (14)
just throwing this out there, i have a few wooden cams for sale also..i have an oak camshaft for 25$, a loblolly pine cam for 35$, but me personally i prefer the tb special..its made out of a tobacco stick and its hell. sounds like a joker laughin it chop so hard. pm me for more deals on some hellacious wooden shafts!!
#16
TECH Fanatic
iTrader: (1)
just throwing this out there, i have a few wooden cams for sale also..i have an oak camshaft for 25$, a loblolly pine cam for 35$, but me personally i prefer the tb special..its made out of a tobacco stick and its hell. sounds like a joker laughin it chop so hard. pm me for more deals on some hellacious wooden shafts!!
#17
TECH Enthusiast
iTrader: (1)
Join Date: Apr 2009
Location: Boise Idaho
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
just throwing this out there, i have a few wooden cams for sale also..i have an oak camshaft for 25$, a loblolly pine cam for 35$, but me personally i prefer the tb special..its made out of a tobacco stick and its hell. sounds like a joker laughin it chop so hard. pm me for more deals on some hellacious wooden shafts!!
#18
12 Second Club
iTrader: (13)
hahahahahaahahah not pat g the goddes of cam shafts. lol bahbahahahahaha Is eps pretty good? just looking for a cam to put in a 6.0 for a 1800 lb mud truck/ gutted s10turbo 350/35 inch cut bogger and alottttt of spray. We only run 200 ft so trying to get all i can out of it. I own a trans am with heads cam etc and 275 worth of nitrous lol. It has a ms3 in it and the cam is awsome just dont think that it will work because it doesnt start to ride until up stairs but on gas its hell. texas speed wasnt much help just told me to put a torquer in it.. had one of those and was pretty much ****. car sped up half a second a quarter on hp and 8 tenths on nitrous. same heads and bottom end both tuned by me. Mess around and put a wooden cam shaft in it and shower down on 300 on that fogger with about 14 degrees of timing ))) thanks alot to all that have helped
just throwing this out there, i have a few wooden cams for sale also..i have an oak camshaft for 25$, a loblolly pine cam for 35$, but me personally i prefer the tb special..its made out of a tobacco stick and its hell. sounds like a joker laughin it chop so hard. pm me for more deals on some hellacious wooden shafts!!
1- OP was really bored
OR
2- he thinks its a really funny joke