FMS Cam Owners
01-15-2004, 11:27 AM
#22
theres no doubt about it his cams and combos make power, plus he was very helpful and informative on the phone when i called today.
the cam he recommended to me was the 228/230 .581/.595 112 LSA with +2 or +4 advance
im very interested in possibly swapping it out
ive turned 118 mph with the combo i have now (stock rear and gears) with a 3420 raceweight and +400 DA. im headed back next saturday for times with some more bolt ons ive added (asps and new exhaust) hoping for 120.
do you guys think it would be worth it over the 224/224 .581/.581 112 LSA 0 advance i have now???
the cam he recommended to me was the 228/230 .581/.595 112 LSA with +2 or +4 advance
im very interested in possibly swapping it out
ive turned 118 mph with the combo i have now (stock rear and gears) with a 3420 raceweight and +400 DA. im headed back next saturday for times with some more bolt ons ive added (asps and new exhaust) hoping for 120.
do you guys think it would be worth it over the 224/224 .581/.581 112 LSA 0 advance i have now???
Last edited by Tally TransAm; 01-15-2004 at 11:33 AM.
01-15-2004, 11:53 AM
#23
Originally Posted by NB99Z
I have his 228/230 cam. Best pass so far was 11.41 @ 119.25, 3700# race weight, and +800 DA. My best trap speed with this cam is 119.84.
01-15-2004, 07:18 PM
#29
Originally Posted by Damian
FMS is the **** and Alan's cam are the best available on the market IMO. His ramps/lobes are definately a step ahead of the game....Obviously since I am making big #'s with a cam HALF the size of a G5X2 or TSP231 cam...
Josh
Josh
Bruce
01-16-2004, 02:44 AM
#32
Originally Posted by Cammin BeaSSt
Lmfao, if they only knew.. Guys, Damians cam is no big superstick .. Most of the FMS off the shelf cams would make the same power IN THE PROPER COMBO........
My cam is nothing special. Just a nice lil recipe that Alan & I cooked up, and she works
ANYTHING and I mean ANYTHING you get from FMS is going to make power......PERIOD
FMSJosh
01-16-2004, 05:26 AM
#33
Originally Posted by Cammin BeaSSt
Lmfao, if they only knew.. Guys, Damians cam is no big superstick .. Most of the FMS off the shelf cams would make the same power IN THE PROPER COMBO........
I don't think you need a huge cam to go fast, and would like a smaller cam that still runs. When I swap cams, a Futral cam will be going back in. Bruce
01-17-2004, 12:23 PM
#36
TECH Enthusiast
Join Date: Jun 2003
Location: So Cal
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kurtomac
i dont have any problems with my comp X-ER 224 581 112+2 cam but im thinkin of switching to the FMS 228 230 581 591 112+4....what do you guys think about that....btw i made 420rwhp 396rwtq through my 12 bolt with stage 2 TEA 5.3's cut .016 and ran 11.60 at 117.5....think it would be worth the swap, would i gain much if any?
