FMS Cam Owners
#3
TECH Apprentice
Join Date: Dec 2001
Location: Waldorf, Maryland
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Got his 228/230 cam on 113 LSA w/ TEA 1.5's. No dyno numbers yet (getting tuned this week actually - hopefully tomorrow). Took it to the track once (first time w/ H/C) and went 11.70 at 118 mph. IMO - its not bad considering its untuned, complete full weight (still w/ jack/spare) and basically stock suspension.
When I got some dyno numbers - I will post them. She definately feels real strong.
When I got some dyno numbers - I will post them. She definately feels real strong.
#7
TECH Apprentice
Join Date: Dec 2001
Location: Waldorf, Maryland
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by HC02SS
Hannibal, what was your 60'?
I believe it was 1.65 seconds. Would have gotten better but I broke the rear (AGAIN) on the cars first pass. I let a buddy make a run in it since he had a lot of seat time with a H/C car to see what he could do with it. I dont remember what kind of 60' he got (didnt break until 3 to 4 shift).
Trending Topics
#8
10 Second Club
iTrader: (5)
Join Date: Apr 2003
Location: Okinawa, Japan
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i dont have any problems with my comp X-ER 224 581 112+2 cam but im thinkin of switching to the FMS 228 230 581 591 112+4....what do you guys think about that....btw i made 420rwhp 396rwtq through my 12 bolt with stage 2 TEA 5.3's cut .016 and ran 11.60 at 117.5....think it would be worth the swap, would i gain much if any?
#20
TECH Apprentice
Join Date: Dec 2001
Location: Waldorf, Maryland
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Kurtomac
which cam did you have before the new cam and was there much difference.....tell me your mods for ref.
I had an XER 224/.591/112 LSA when I was running cam only. Same bolt ons as I have now. I ran a best of 12.13 at 115mph. Put down 379 RWHP on a suspect dyno (not that they mean much) running through 12-bolt w/ 4.30 gears, McLeod Iron Disc cluthc, on 17" Chrome SS wheels (heavy). Just shortly after that - I had a lifter seize up which gouged my cam up and ruined it.
Since we had to pull the heads to change lifters - I threw on some PP Stage 2's and replaced the XER with the FMS cam (after many long talks with Alan). He spec'd me a cam which gave me some good power and allowed me to keep my driveability. I ended up having a lot of issues with the PP heads (never dynoed/tracked them) so I swapped them out for a set of TEA Stage 1.5's. Took it to the track untuned w/ the TEA's just to make a couple passe before the end of the season and ran 11.70 at 118 mph at full weight with my big 250lbs *** driving (having no seat time) w/ a not so ET friendly +2000 D/A. You can check out the link in my sig for my webpage which shows all mods on the car. I should have some dyno numbers tonight or tomorrow.