Valvetrain Qustion
Thread Starter
On The Tree
iTrader: (18)
Joined: Sep 2008
Posts: 142
Likes: 0
From: Lake Jackson, Tx
Valvetrain Qustion Anybody using Jegs Aluminum Rocker arms? I was just wondering if they were worth it or not. I know most people opt for Harland Sharpe or Yella Terra but I'm on a tighter budget...
Thanks!
Thanks!
Hmmm. I kind of thought you might say that. What kind of cam are you running? Depending on what it is I am probably going to advise against jumping the ratio of your rockers.
Trending Topics
Yeah, I would stick with the stockers or atleast stock ratio. Are you looking for an upgrade for power or dependability? IF dependability I would look into the trunion upgrade from Comp.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Just trying to save you from a nightmare down the road. 
If it were me I would be looking at a bigger cam instead of the rocker bump. Throw off the geometry a bit and you are up a creek.
Let me know if you need help with anything else and I will try my best or atleast find someone that can help ya.
If it were me I would be looking at a bigger cam instead of the rocker bump. Throw off the geometry a bit and you are up a creek.
Let me know if you need help with anything else and I will try my best or atleast find someone that can help ya.
Thread Starter
On The Tree
iTrader: (18)
Joined: Sep 2008
Posts: 142
Likes: 0
From: Lake Jackson, Tx
Just trying to save you from a nightmare down the road.
If it were me I would be looking at a bigger cam instead of the rocker bump. Throw off the geometry a bit and you are up a creek.
Let me know if you need help with anything else and I will try my best or atleast find someone that can help ya.
If it were me I would be looking at a bigger cam instead of the rocker bump. Throw off the geometry a bit and you are up a creek.
Let me know if you need help with anything else and I will try my best or atleast find someone that can help ya.
This is THE reason LS1Tech is the ****!!