Cam only LS1??
#22
TECH Regular
Join Date: Jan 2004
Location: Somewhere in Cajun Country
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SSactionLs1
i would never base my decisions off of ONE track time...track conditions make or brake a setup. And i believe the LG5x2 in an m6 got 10.9x as well..
#23
SN95 Director
iTrader: (16)
Originally Posted by SMOKIN01TA
im sure jrp will chime in but i believe its around a 19x/20x or lower
as spec'd by comps
stock 98 trans am cam
duration@.050 198.86 intake 209.25 exhaust
lift .498 intake .497 exhaust
LSA 119.45
stock 02 trans am cam
duration@.050 196.37 intake 208.72 exhaust
lift .464 intake .479 exhaust
LSA 115.92
#28
TECH Enthusiast
iTrader: (10)
Join Date: Aug 2002
Location: Arlington, TX Congestion City
Posts: 720
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by 5.SLOW
Well from what I have been thinking something like around 221 duration or a little higher is where most people start. What is the stock LS1 cam specifications?
You will need tuning with just about any cam you go with that'll make you power. Seems from your statement you have a misconception of LS1-Edit anyways. It's a good thing when done by the right person. That alone sometimes will net ya 10 - 20 HP. If I were you and wanted to go middle of the road I'd get either a 221 or a 224 duration cam. Make it worth your while. Might as well drop the whole 6200 thing. Your cutting yourself way short of what that STOCK bottom end will hold.
#30
TECH Apprentice
Join Date: Nov 2003
Location: Des Plaines IL
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
I got a 224/581 cam with headers and LITTLE bolt-ons....and it is a daliy driver 6-speed.
I am close to the 400rwhp range with stock heads. Call up a well know sponsor on this board like speed inc....They have done tons of these set ups and will take good care of your needs. Oh yea I love to scare those new cobras to ,,,good luck
I am close to the 400rwhp range with stock heads. Call up a well know sponsor on this board like speed inc....They have done tons of these set ups and will take good care of your needs. Oh yea I love to scare those new cobras to ,,,good luck
#31
TECH Apprentice
Join Date: Nov 2003
Location: Des Plaines IL
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01-Z
Mod's?
macs,borla,fipk,GMS maf,asp,all the other boltons,suspension.lightweight.
Good luck...IT AIN'T EASY.
macs,borla,fipk,GMS maf,asp,all the other boltons,suspension.lightweight.
Good luck...IT AIN'T EASY.
Is this through a stock 7.5inch (toy).....If not what gear are you running??