Well I ordered my new motor today..
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
Well I ordered my new motor today..
As some of you know my #1 piston commited suicide and decided it wanted to take the head with it. I've spent the last week kicking around what to do. I looked at everything from ARE 382 longblock to rebuilding my old motor.
Previously I had:
Stock Bottom End
SLP Stage I heads
TR 224/224-112 CAM
TR Pushrods
SLP Headers
JW 10" 3400 Verter
TH400 /Tbrake
Moser 12 bolt with 3.73
Today I order:
Forged 346 Shortblock
Refinished Crank
Diamond Forged Flat Top Pistons
Diamond Pro Rings
Factory Rods w/ ARP Bolts
Clevite Race Bearings
ARP Head Studs
5.3 GTP Stage II Heads
Comp 978 Springs
TR 230/224-112 CAM
TR Racing Headers
BMR Tubular K-member
BMR Lower A-Arms
YANK SS3800E
Gaskets and fuilds
Oh yea I spent some cash today <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
I want to thank Paul at Thunder Racing for hooking me with some discounts, Thanks Paul! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
I should have all my parts in and the car on the road in a month. I chose the Yank SS3800E because I want an all purpose converter. I will be daily driving, racing, and spraying a minimum of a TNT-150 shot after I get thing put back together. I know the TR230/224 isn't a nitrous cam, but I want to be able to kick some *** all motor and be able spray a 150-200 when I feel frisky. I know the a split cam would work better, but I am curious to see how this setup will work as I turn up the juice on it.
Now for the hard part; waiting for parts.
Wish me luck.
Lee
Previously I had:
Stock Bottom End
SLP Stage I heads
TR 224/224-112 CAM
TR Pushrods
SLP Headers
JW 10" 3400 Verter
TH400 /Tbrake
Moser 12 bolt with 3.73
Today I order:
Forged 346 Shortblock
Refinished Crank
Diamond Forged Flat Top Pistons
Diamond Pro Rings
Factory Rods w/ ARP Bolts
Clevite Race Bearings
ARP Head Studs
5.3 GTP Stage II Heads
Comp 978 Springs
TR 230/224-112 CAM
TR Racing Headers
BMR Tubular K-member
BMR Lower A-Arms
YANK SS3800E
Gaskets and fuilds
Oh yea I spent some cash today <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
I want to thank Paul at Thunder Racing for hooking me with some discounts, Thanks Paul! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
I should have all my parts in and the car on the road in a month. I chose the Yank SS3800E because I want an all purpose converter. I will be daily driving, racing, and spraying a minimum of a TNT-150 shot after I get thing put back together. I know the TR230/224 isn't a nitrous cam, but I want to be able to kick some *** all motor and be able spray a 150-200 when I feel frisky. I know the a split cam would work better, but I am curious to see how this setup will work as I turn up the juice on it.
Now for the hard part; waiting for parts.
Wish me luck.
Lee
#2
TECH Fanatic
Join Date: Sep 2002
Location: -TeXaS-?
Posts: 1,505
Likes: 0
Received 0 Likes
on
0 Posts
Re: Well I ordered my new motor today..
Good Luck and good setup 2 <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Did your piston take ur heads on a Nitrous pass? How much were u spraying?
I am currently waiting for some parts from MTI with a similiar cam like urs
S2 Heads/X1 Cam <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Good luck and go after them Stangs <img border="0" alt="[judgement]" title="" src="graemlins/gr_judge.gif" /> J/J
Did your piston take ur heads on a Nitrous pass? How much were u spraying?
I am currently waiting for some parts from MTI with a similiar cam like urs
S2 Heads/X1 Cam <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Good luck and go after them Stangs <img border="0" alt="[judgement]" title="" src="graemlins/gr_judge.gif" /> J/J
#3
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
Re: Well I ordered my new motor today..
I was running NA, I still don't know what happened. I still tearing down the block and heads. The car was running fine, I went to leave work and the motor wouldn't turn over.
Here's a link with some pics of my busted up ride:https://ls1tech.com/ubb/ultimatebb.p...c;f=1;t=011212
Here's a link with some pics of my busted up ride:https://ls1tech.com/ubb/ultimatebb.p...c;f=1;t=011212
#5
TECH Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
Re: Well I ordered my new motor today..
Paul is the devil. <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
Next thing you know, you'll be thinking of other things that you need... Paul pops up, says "yeah, we can get you that". You turn around, your bill keeps growing. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Paul is evil. Wouldn't have it any other way. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Good choice. Congrats. Oh yeah, the wait is killer. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
-Andrew
Next thing you know, you'll be thinking of other things that you need... Paul pops up, says "yeah, we can get you that". You turn around, your bill keeps growing. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Paul is evil. Wouldn't have it any other way. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Good choice. Congrats. Oh yeah, the wait is killer. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
-Andrew
#6
TECH Senior Member
iTrader: (2)
Join Date: Mar 2002
Location: South of Heaven
Posts: 5,469
Likes: 0
Received 0 Likes
on
0 Posts
Re: Well I ordered my new motor today..
LOL! Paul did the same thing to me, I called for ARP rod bolts, the next thing I know I got a new cam, oil pump, timing chain, pistons, etc. He has helped me tremdously with my purchases, great guy <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
#7
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
Re: Well I ordered my new motor today..
I know what you mean! I forgot to order my NGK plugs, I'm afraid to call Paul back, I'll probably spend another grand, he makes everything so easy to buy!
<img border="0" alt="[gruffy cottonball]" title="" src="graemlins/gr_gruffy.gif" />
<img border="0" alt="[gruffy cottonball]" title="" src="graemlins/gr_gruffy.gif" />
Trending Topics
#8
"The Drag Racing Director"
iTrader: (10)
Re: Well I ordered my new motor today..
<img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" /> <img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" /> <img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" /> to Thunder Racing.
Coach
Coach
#10
TECH Fanatic
iTrader: (2)
Join Date: Nov 2001
Location: Baton Rouge
Posts: 1,894
Likes: 0
Received 0 Likes
on
0 Posts
Re: Well I ordered my new motor today..
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by FEAR THE LS1:
<strong> I know what you mean! I forgot to order my NGK plugs, I'm afraid to call Paul back, I'll probably spend another grand, he makes everything so easy to buy!
<img border="0" alt="[gruffy cottonball]" title="" src="graemlins/gr_gruffy.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">It's okay call me back, I'll play nice. <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
Paul
<strong> I know what you mean! I forgot to order my NGK plugs, I'm afraid to call Paul back, I'll probably spend another grand, he makes everything so easy to buy!
<img border="0" alt="[gruffy cottonball]" title="" src="graemlins/gr_gruffy.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">It's okay call me back, I'll play nice. <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
Paul