Stew w/92&00

I just dynoed 352 rwhp and 350 rwtq saturday with mods in the sig.

WS6snake-eater

I hit 371 rwhp with mine. At the time I had MTI lid K&N filter, smooth bellows, LS6 cam and springs and retainers, ls6 intake, Pacesetter longtubes, and Y pipe (no cats), QTEC open (rest of exhaust was stock WS6 stuff), and tuning by MTI. This was done through an A4 with stock 3.23 gearing. I honestly believe that with an ASP pulley, ported TB and some slight home portmatching on the heads I could have hit 400 rwhp with the LS6 cam. It is a great cam for the price. Then again my car is a bit of a freak, I hit 330 rwhp with just the lid filter and cutout. All runs where done at MTI I'll try to find the graphs.

Linear Velocity

iTrader: (1)

Jason's car had a rebuilt engine (lighter internals) and a stock 3.42 rear on an M6, I believe it was thru macs and a cutout with some good tuning.

JZ'sTA

iTrader: (23)

A local guy put down 355 with stock heads in a 02 camaro A4.
He is runing a 12.30@114 mph with a 1.9 60.
I could see a better 60 and heads doing a high 11.

2KSSLS1

what about custom grind ls6 cam would it still pass somg