do mahle pistons come factory?
#21
Launching!
iTrader: (22)
Join Date: Apr 2008
Location: lewistown, PA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ouchies.....im glad mine didnt come out like that. im pretty sure my pistons are stock though after comparing to a few other pictures. I would think if they were "aftermarket" mahles wouldnt they be full floating, which mine are not. I measured mine a little bit ago and got 3.898" in diameter. Either way if my pistons weren't stock from the factory i still need a new set of pistons so it really doesn't matter to me although it would be nice to know if these were the stock pistons.
#23
Launching!
iTrader: (3)
Join Date: Feb 2004
Location: Walnutport, PA
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
im willing to bet those are stockers. im going out to the garage in a little, ill look at my 02's and see what the underside and rest of it looks like. ill check a good one too, and report back.
but the stock ones have coated skirts on them. at least my 02 ones do.
if those were aftermarket pistons, why wouldnt he upgrade to new rod bolts?
aaron
but the stock ones have coated skirts on them. at least my 02 ones do.
if those were aftermarket pistons, why wouldnt he upgrade to new rod bolts?
aaron
#29
TECH Fanatic
iTrader: (8)
Join Date: Nov 2009
Location: phx the cactus patch
Posts: 1,095
Likes: 0
Received 13 Likes
on
13 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes , I would say +1 that some years were Federal Mogule pistons , some of the seals I've seen were FM and some pistons were Mahle . I just hope the factory Mahle slugs were the usual 16% silicon as opposed to a replacement Mahle I bought 4 a 5.3L that is 12% silicon .