Any interest in new GM LS HD Rockers ??
10-26-2010, 03:48 PM
#1
LS1TECH Sponsor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Location: Moline, ILLINOIS
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Any interest in new GM LS HD Rockers ?? Just a post to gauge interest and or information on the value of this.
We have access to a bunch of these. BRAND NEW... GM oem supplier
USA MADE .. $189.00 set... 175.00 ea for 2 sets
I have converted the old style rockers with Comp Cams trunion kits,
and this would seem to be a better option.
NEW GM ROLLER ROCKER ARMS LS1 LS2 LS 6
FITS 5.3L 5.7L 6.0L
GENERATION III ENGINES
SET OF 16
REDESIGNED HEAVY DUTY BIG DIAMETER ROLLER BEARING
NO NEED TO REPLACE FACTORY SMALL ROLLERS WITH
DIFFICULT TO INSTALL AFTERMARKET REPALEMENT TRUNIONS
MADE IN USA
FULL OIL FLOW UNSHIELDED ROLLER BEARINGS
ALLOWS HOT OIL TO ESCAPE AND BE REPLACED
OIL GETS IN AND OIL GETS OUT
360 DEGREE FULL LIFT TRUNION SHAFT.
NOT RESRICTED LIKE OEM, WORKS WITH HIGH LIFT CAMS
NEW ATTACHING HARDWARE INCLUDED
DID I SAY, MADE IN USA ??
We have access to a bunch of these. BRAND NEW... GM oem supplier
USA MADE .. $189.00 set... 175.00 ea for 2 sets
I have converted the old style rockers with Comp Cams trunion kits,
and this would seem to be a better option.
NEW GM ROLLER ROCKER ARMS LS1 LS2 LS 6
FITS 5.3L 5.7L 6.0L
GENERATION III ENGINES
SET OF 16
REDESIGNED HEAVY DUTY BIG DIAMETER ROLLER BEARING
NO NEED TO REPLACE FACTORY SMALL ROLLERS WITH
DIFFICULT TO INSTALL AFTERMARKET REPALEMENT TRUNIONS
MADE IN USA
FULL OIL FLOW UNSHIELDED ROLLER BEARINGS
ALLOWS HOT OIL TO ESCAPE AND BE REPLACED
OIL GETS IN AND OIL GETS OUT
360 DEGREE FULL LIFT TRUNION SHAFT.
NOT RESRICTED LIKE OEM, WORKS WITH HIGH LIFT CAMS
NEW ATTACHING HARDWARE INCLUDED
DID I SAY, MADE IN USA ??
10-27-2010, 12:29 AM
#3
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,240
Likes: 0
Received 81 Likes
on
72 Posts
Seems reasonable, just keep in mind you are creeping up on about half the price of full rollers. People aren't going to spend too much and still have stock rockers.
Trending Topics
10-28-2010, 11:47 AM
#8
LS1TECH Sponsor
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Location: Moline, ILLINOIS
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the responses .... Yes thay are boltin and go deals...
I will check on the L92 LS3 offsets.. But not sure if they already have the big bearings.. any help on that ??
Glad to Ship UK... $40.00 US Postal Priority International
Have a link for purchase.... We accept Paypal too...
http://carshop.carshopinc.com/produc...47/SSILS/HP/RA
I will check on the L92 LS3 offsets.. But not sure if they already have the big bearings.. any help on that ??
Glad to Ship UK... $40.00 US Postal Priority International
Have a link for purchase.... We accept Paypal too...
http://carshop.carshopinc.com/produc...47/SSILS/HP/RA
10-28-2010, 03:12 PM
#12
This is an OEM supplier manufacturing the rocker arms and then installing an aftermarket trunion, or is/will this be an OEM GM item? I'd like to know who makes them, quality and comparison to stockers with the Comp upgrade before purchasing. I'd be more than willing to buy a set after learning more about them. Thanks.
10-30-2010, 08:30 AM
#19
I realize that this question was not addressed to me, but wanted to add my experience. Have had a rocker arm needle bearing retainer pop off on my stock rockers while using a med-high lift cam w/ heavier dual springs. When the retainer pops off, the needle bearings come out & get into the heads & oil pan. I have a different solution to the problem. However, the best solution is offered in the aftermarket trunnion upgrade offered here, from the sponsor & by other sponsors. IMO, the problem is few & far between only when relating the problem to stock lift/spring rate cams. Higher lift/heavier spring cams are more susceptible to the problem.
