Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

tsp 231/237&pp 5.3 s2

Old Feb 4, 2004 | 03:41 PM
  #1  
GrimReaper's Avatar
Thread Starter
9 Second Club
iTrader: (33)
 
Joined: Nov 2003
Posts: 372
Likes: 0
From: Lafayette Indiana
Default tsp 231/237&pp 5.3 s2

i just did long tubes, ls6 intake, stage heads and the tsp cam, with proper tune will i be able to be streetable?
Reply
Old Feb 4, 2004 | 03:50 PM
  #2  
SouthFL.02.SS's Avatar
!LS1 11 Second Club
 
Joined: Apr 2003
Posts: 7,133
Likes: 2
From: Miami
Default

Yes. Absolutely. A4 or M6? I ask, 'cause stall or gears should complement the setup.
Reply
Old Feb 4, 2004 | 05:05 PM
  #3  
Magred2001vette's Avatar
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2003
Posts: 621
Likes: 0
From: Dallas, TX
Default

Also...Would one feel more low&mid range HP w/ a 224/224 cam over the 231/237, keeping the gearing the same on both. What are the caracteristics like of both cam under 2500RPM compared to a factory cam?
Reply
Old Feb 4, 2004 | 05:14 PM
  #4  
SouthFL.02.SS's Avatar
!LS1 11 Second Club
 
Joined: Apr 2003
Posts: 7,133
Likes: 2
From: Miami
Default

I've had a 222/222 cam, and the 231/237 cam.
The 231/237 cam really shines up top, but is no slouch in the mid range. Only at the extreme low revs does it stumble (but then again, the entire power curve shifts up with the bigger cam - something expected).

My experience; the 231/237 pretty much mirrored the 222/222, but pulls much harder, and longer up top. The 222/222 had just a tad bit more torque available sooner (again -as expected).
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:17 PM.