I have a TR230 in my motor right now...243 heads milled .020 with ls6 intake pace setter lt's to cut out.

Looking to go with something newer and since i have the motor out I want to cam it.. I want to go with something like a 230/236 on a 111lsa lift under .610 for longevity purposes with eps lobes but I want something more specific than that.

This car is an m6 that will be daily driven with track maybe 8 times a year max.

Looking for about ET's and Trap speeds I can run and TORQUE and horsepower I can make with this set up while making very little compromise with driveability. Also consider that the track out here in Vegas rarely sees below 2000+ DA

 

Have PatrickG spec a cam for you or contact Geoff Skinner with Engine Power Systems.

 

^^^what he said. They will both get you squared away like they did with my set up. These cams are putting out awesome results.

 

Well any idea on what power/ET's I'll see in 2000+ DA

 

whats patrickG's screen name on here. I tried to PM PatrickG but there was no such name

 

https://ls1tech.com/forums/generatio...-me-first.html

 

Patrick-G ,or click on the EPS banner >>>>>>>>>>>>>>>>>>>>>>>>>>

 

Patrick G