Warning!! YT rockers+Comp 987 springs+TR230/224=valvefloat=bent exhaust valves
02-20-2004 | 09:23 AM
#41
TECH Enthusiast
iTrader: (10)
Joined: Aug 2002
Posts: 720
Likes: 1
From: Arlington, TX Congestion City
Originally Posted by verbs
Going with Crane 832 duals good to .650 lift. After talking with a few shops they all said they didn't think the Comp R lifters were mandatory, but couldn't hurt. I only have 40K miles on the car.
Hope your lifters are in good shape. Hate to see you still end up with collapsing lifters. Those Crane's have a lot of seat pressure. I think a general rule should be a good dual spring with the Comp R lifters to use the YT's. But good luck it's worth a shot I guess.
02-20-2004 | 09:54 AM
#42
Thread Starter
TECH Junkie
Joined: Jan 2002
Posts: 3,015
Likes: 0
From: At the office
Originally Posted by 94form2000z
Hope your lifters are in good shape. Hate to see you still end up with collapsing lifters. Those Crane's have a lot of seat pressure. I think a general rule should be a good dual spring with the Comp R lifters to use the YT's. But good luck it's worth a shot I guess.
02-20-2004 | 10:37 AM
#43
TECH Enthusiast
iTrader: (10)
Joined: Aug 2002
Posts: 720
Likes: 1
From: Arlington, TX Congestion City
Originally Posted by verbs
I was told 140lbs is on the light side
