This is exactly how to do it, If its stuck that tight the valve prolly closed on it. crank it over by hand till the valve opens and it should let go.

 

That one picture looks like a mouse was squished in there lmao even though it's a towel

 

[QUOTE=KH504;15085588]Pull the heads off and get you a set of stock 243.[

Are stock 243s better than the 241s?

 

lol same thing happened to my buddy like 4-5 years ago on his T/A while we were porting tb went to get food looked like rain his gf cranked up car to roll windows up and that ensued.

 

I tried that, the corner of the towel was wrapped around the valve

 

Sry guess i was a lil late oops.

 

thats some pretty big kitchen towel. I wouldn't be surprised if you found it bent the valves as well.

 

A pair of steel toe boots TO KICK HER ***!

 

Yes 243's are much better than the 241's. Worth the upgrade if your wallet allows it.

 

Did you slap her around a lil? She has a lot of sandwiches to make, to make up for this..

 

lol ^

 

I would hope she doesnt do any complaining about you spending money on the upgrades after doing that...

 

make her pay for new set of head from Texas speed

 

 

I was extremely pissed, but she is genuinely sorry and I needed to upgrade the heads and do lifters anyway, this is just a good excuse to get it done. She WILL be helping with the cost.


Whats a good place to order LS7 Lifters and Head/Exhaust Gaskets.

 

Texas speed sir. all parts that are are looking for are always in stock...................

 

have you tried beating on it?...not the the car...the woman

somtimes that helps...did anyone know that it's an actual law here in GA that on sundays at noon..you can take your wife to the courthouse steps and beat her LOL..
i always tell the wife..yeak okay..keep talking s#$t...Sunday is once every week lol

but nah bro seriously..really no need to clean your pistons ..it's just carbon buildup and it breaks away on it's own for the most part...if i'm wrong here someone correct me and help him out lol

 

Wow, guess you see something new everyday haha.

BTW, doesn't take much to bend a valve. I'd make sure you pull that valve and check it very carefully because even the slightest bend and you'd be screwed.

 

Texas Speed has a million different LSX Head gaskets, what bore size do I need? Also I broke the little rail that bolts to all the rockers whats that thing called and where can i get one?

 

I found a set of 241's supposedly with only 600 miles on them for 300, is this a good deal?