EPS 222/226 LSA 115+3 lift .597/605 numbers?
#1
TECH Regular
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
First of all I was sold on going with a 224 cam from a vendor on here for a killer price...this is for my daily driver here in CA.
After research and talking to others I somehow found myself looking at options through Geoff at EPS. I've read about their lobe technology, granted I didn't understand everything as I was reading.
Geoff is an awesome guy that is very thorough...He is not the cheapest but he broke everything down for me and educated me on a few things. I took about an 1hour and a half on the phone with him over a couple of days. I felt good about the decision after talking to him.
The main reason I was going with the 224 / 114 LSA cam initially because it seemed like a good overall cam, and it probably is. I just wanted to maximize the power/efficiency with my close to stock car. I feel good with my decision though.
I have an 02 WS6 with the only power performance mods being a lid and a GMMG catback. It is a 6speed car.
How much power do you think I will make???
Anyone else have a similar cam and what were your thoughts/impressions after?
Once the install/dyno tune is complete I will post the vid/graphs up.
After research and talking to others I somehow found myself looking at options through Geoff at EPS. I've read about their lobe technology, granted I didn't understand everything as I was reading.
Geoff is an awesome guy that is very thorough...He is not the cheapest but he broke everything down for me and educated me on a few things. I took about an 1hour and a half on the phone with him over a couple of days. I felt good about the decision after talking to him.
The main reason I was going with the 224 / 114 LSA cam initially because it seemed like a good overall cam, and it probably is. I just wanted to maximize the power/efficiency with my close to stock car. I feel good with my decision though.
I have an 02 WS6 with the only power performance mods being a lid and a GMMG catback. It is a 6speed car.
How much power do you think I will make???
Anyone else have a similar cam and what were your thoughts/impressions after?
Once the install/dyno tune is complete I will post the vid/graphs up.
#2
10 Second Club
iTrader: (22)
Join Date: Sep 2005
Location: Bellingham, WA
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
First of all I was sold on going with a 224 cam from a vendor on here for a killer price...this is for my daily driver here in CA.
After research and talking to others I somehow found myself looking at options through Geoff at EPS. I've read about their lobe technology, granted I didn't understand everything as I was reading.
Geoff is an awesome guy that is very thorough...He is not the cheapest but he broke everything down for me and educated me on a few things. I took about an 1hour and a half on the phone with him over a couple of days. I felt good about the decision after talking to him.
The main reason I was going with the 224 / 114 LSA cam initially because it seemed like a good overall cam, and it probably is. I just wanted to maximize the power/efficiency with my close to stock car. I feel good with my decision though.
I have an 02 WS6 with the only power performance mods being a lid and a GMMG catback. It is a 6speed car.
How much power do you think I will make???
Anyone else have a similar cam and what were your thoughts/impressions after?
Once the install/dyno tune is complete I will post the vid/graphs up.
After research and talking to others I somehow found myself looking at options through Geoff at EPS. I've read about their lobe technology, granted I didn't understand everything as I was reading.
Geoff is an awesome guy that is very thorough...He is not the cheapest but he broke everything down for me and educated me on a few things. I took about an 1hour and a half on the phone with him over a couple of days. I felt good about the decision after talking to him.
The main reason I was going with the 224 / 114 LSA cam initially because it seemed like a good overall cam, and it probably is. I just wanted to maximize the power/efficiency with my close to stock car. I feel good with my decision though.
I have an 02 WS6 with the only power performance mods being a lid and a GMMG catback. It is a 6speed car.
How much power do you think I will make???
Anyone else have a similar cam and what were your thoughts/impressions after?
Once the install/dyno tune is complete I will post the vid/graphs up.
#3
TECH Regular
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
with what heads? EPS cams seem to respond well to stock or mildly ported 243 casting heads. If I were you, I would bump to Geoff's next biggest cam, the 226/234 113+2LSA... it's probably his most popular cam and seems to make great power. I would estimate your 222/226 with stock heads may make 390-400rwhp. Whereas the 226/234 + 243 heads seems to be making around 420rwhp. Hope this helps!
Wow I never saw that coming.390rwhp with stock heads and manifolds????I would be sooooo happy if I could hit that mark with this cam. Hecc if I could get 370 rwhp with stock heads and manifolds I will be happy.
I know a lot of it depends on the tune as well. I most likely will take it to Mark Romans who is well known in GM High Tech as one of the top tuners in northern california.
#4
10 Second Club
iTrader: (22)
Join Date: Sep 2005
Location: Bellingham, WA
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Stock heads and manifolds as stated.
Wow I never saw that coming.390rwhp with stock heads and manifolds????I would be sooooo happy if I could hit that mark with this cam. Hecc if I could get 370 rwhp with stock heads and manifolds I will be happy.
I know a lot of it depends on the tune as well. I most likely will take it to Mark Romans who is well known in GM High Tech as one of the top tuners in northern california.
Wow I never saw that coming.390rwhp with stock heads and manifolds????I would be sooooo happy if I could hit that mark with this cam. Hecc if I could get 370 rwhp with stock heads and manifolds I will be happy.
I know a lot of it depends on the tune as well. I most likely will take it to Mark Romans who is well known in GM High Tech as one of the top tuners in northern california.
#6
TECH Regular
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Remember some of the EPS cams are designed for stock manifolds.
Good luck with your build as well.
Trending Topics
#12
TECH Regular
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks for all the input/advice by all.
Now that I am so deep in this $$$ wise. I am considering just throwing in some 243's as well.
I have searched the parts classified section on tech, I have looked at SDPC's website.
Who sells 243 heads ported and unported for the best value outside of random deals popping up in the classifieds????
Now that I am so deep in this $$$ wise. I am considering just throwing in some 243's as well.
I have searched the parts classified section on tech, I have looked at SDPC's website.
Who sells 243 heads ported and unported for the best value outside of random deals popping up in the classifieds????
#18
Staging Lane
Join Date: Jun 2010
Location: SOMEWHERE !
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have the same cam ..
https://ls1tech.com/forums/dynamomet...p-410rwtq.html
Last result 435 rwhp / 411 rwtq .. I will do PRC-215 milled to 59cc in the near future
https://ls1tech.com/forums/dynamomet...p-410rwtq.html
Last result 435 rwhp / 411 rwtq .. I will do PRC-215 milled to 59cc in the near future
#19
TECH Regular
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have the same cam ..
https://ls1tech.com/forums/dynamomet...p-410rwtq.html
Last result 435 rwhp / 411 rwtq .. I will do PRC-215 milled to 59cc in the near future
https://ls1tech.com/forums/dynamomet...p-410rwtq.html
Last result 435 rwhp / 411 rwtq .. I will do PRC-215 milled to 59cc in the near future
I will post results up for sure as soon as everything is done. I am hoping by the end of August.