Open Letter From MTI Concerning Cylinder Heads
#1
Launching!
Thread Starter
Join Date: Nov 2001
Location: Houston, TX
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We've recently received a great deal of e-mail inquires and questions about the manufacturing process that goes into our cylinder heads and the steps we take to ensure repeatable performance and quality in every set of heads we produce. Based upon that and the huge investment that a cylinder head purchase represents to our customers, I thought I'd take a moment and discuss the process that goes into each set of heads that leaves our shop:
First and foremost, all cylinder heads are hand ported and assembled using only the finest parts. MTI has spent hundreds of research and development hours in Gen-III cylinder head port design and employs two full time machinists who average approx 40 hours of work on each set of cylinder heads that leaves our machine shop. All of MTI's Stage II E, R and Stage III cylinder heads are assembled using the finest components available including Ferrea stainless steel one piece valves, custom lightweight titanium retainers engineered to our exacting specifications, custom double valve springs good to over .600 lift and custom engineered spring locators that ensure positive spring location to prevent any type of lateral spring movement. Heads can also be milled .030 inches at the customers request to increase compression by .5 point.
Secondly, each set of heads goes through a complete range of testing and analysis. Using our Superflow SF-600 flowbench with Flowcom, we test and flow each set of cylinder heads before they leave our machine shop and will provide you with flow sheets for your individual cylinder heads. We guarantee that your cylinder heads flow exactly what we promised, and will reflect that on the dyno, the street, and at the track. Period.
And finally, each set of heads comes fully warrantied - Each set of cylinder heads that we produce comes with an unconditional 12 month/12,000 mile guarantee. If anything goes wrong, we'll take care of it. No questions asked. After 10 years in business, our reputation is too important to risk so if you have any issues - we'll handle it. Why? Because we're certain that you won't.
The one exception to this warranty is a nitrous application or forced induction vehicle. Due to the inherent dangers with these processes, we can't offer a warranty on heads installed on these applications - but I will say this: We have hundreds of sets of heads on FI and nitrous cars throughout the world and our failure rate is nearly non-existent even on these applications!
I always like to provide proof, not just promises so here's an interesting case study: A standard hand ported set of our Stage III LS6 cylinder heads was on Ron Adee's Corvette when he won Car & Driver's One Lap of America in mid 2003. That's a contest that tests both man and machine as each vehicle is put through 4,000 miles of dragstrip and road course abuse in just two weeks. The components in Ron's cylinder heads are the same components that we'll put in your heads and you can expect the same quality whether it's on your daily driver or an all out race application.
Drawbacks to our process? I'll be frank - there are a couple. We don't mass produce cylinder heads and have them stocked to the ceiling, we do require a core on most of our cylinder heads, it'll take our staff about three weeks to produce your heads and at $1595.00 for our Stage II E Heads, we are more expensive than some other alternatives out there.
But if you want the highest quality and parts, backed up by an excellent warranty and a decade of service and dedication, then I'd like to extend a personal invitation to you to join the hundreds of satisfied MTI's customers who have purchased our cylinder heads in the past ten years.
I appreciate your time and consideration. Please feel free to visit our website www.motorsporttech.com or contact myself or any of my staff to discuss in more detail or place your order.
Sincerely,
Jayson Cohen, President
Motorsport Technologies, Inc.
First and foremost, all cylinder heads are hand ported and assembled using only the finest parts. MTI has spent hundreds of research and development hours in Gen-III cylinder head port design and employs two full time machinists who average approx 40 hours of work on each set of cylinder heads that leaves our machine shop. All of MTI's Stage II E, R and Stage III cylinder heads are assembled using the finest components available including Ferrea stainless steel one piece valves, custom lightweight titanium retainers engineered to our exacting specifications, custom double valve springs good to over .600 lift and custom engineered spring locators that ensure positive spring location to prevent any type of lateral spring movement. Heads can also be milled .030 inches at the customers request to increase compression by .5 point.
Secondly, each set of heads goes through a complete range of testing and analysis. Using our Superflow SF-600 flowbench with Flowcom, we test and flow each set of cylinder heads before they leave our machine shop and will provide you with flow sheets for your individual cylinder heads. We guarantee that your cylinder heads flow exactly what we promised, and will reflect that on the dyno, the street, and at the track. Period.
And finally, each set of heads comes fully warrantied - Each set of cylinder heads that we produce comes with an unconditional 12 month/12,000 mile guarantee. If anything goes wrong, we'll take care of it. No questions asked. After 10 years in business, our reputation is too important to risk so if you have any issues - we'll handle it. Why? Because we're certain that you won't.
The one exception to this warranty is a nitrous application or forced induction vehicle. Due to the inherent dangers with these processes, we can't offer a warranty on heads installed on these applications - but I will say this: We have hundreds of sets of heads on FI and nitrous cars throughout the world and our failure rate is nearly non-existent even on these applications!
I always like to provide proof, not just promises so here's an interesting case study: A standard hand ported set of our Stage III LS6 cylinder heads was on Ron Adee's Corvette when he won Car & Driver's One Lap of America in mid 2003. That's a contest that tests both man and machine as each vehicle is put through 4,000 miles of dragstrip and road course abuse in just two weeks. The components in Ron's cylinder heads are the same components that we'll put in your heads and you can expect the same quality whether it's on your daily driver or an all out race application.
Drawbacks to our process? I'll be frank - there are a couple. We don't mass produce cylinder heads and have them stocked to the ceiling, we do require a core on most of our cylinder heads, it'll take our staff about three weeks to produce your heads and at $1595.00 for our Stage II E Heads, we are more expensive than some other alternatives out there.
But if you want the highest quality and parts, backed up by an excellent warranty and a decade of service and dedication, then I'd like to extend a personal invitation to you to join the hundreds of satisfied MTI's customers who have purchased our cylinder heads in the past ten years.
I appreciate your time and consideration. Please feel free to visit our website www.motorsporttech.com or contact myself or any of my staff to discuss in more detail or place your order.
Sincerely,
Jayson Cohen, President
Motorsport Technologies, Inc.
#4
LS1Tech Co-Founder
iTrader: (38)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Good info Jayson. I think it would also be important to point out that the head porters at MTI work on a base salary + commission, and that they must put each and every set of heads through a strict Quality Control test, which includes flow bench testing, before the heads are approved for sale. This keeps your guys committed to quality, and from being in a hurry to turn-n-burn heads out. If the heads don't pass requirements, the porters don't get paid for them, and the heads get reworked until they pass, or they get scrapped. Thats the best way to maintain consistent products in my opinion. Sure, this QC costs more, but its worth it.
Tony
Tony
Trending Topics
#10
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
...it'll take our staff about three weeks to produce your heads and at $1595.00 for our Stage II E Heads, we are more expensive than some other alternatives out there.
Do you take LS1 perimeter-bolt heads as cores? (stupid '97...)
-Jake
#11
TECH Fanatic
iTrader: (15)
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
Originally Posted by Nine Ball
Good info Jayson. I think it would also be important to point out that the head porters at MTI work on a base salary + commission, and that they must put each and every set of heads through a strict Quality Control test, which includes flow bench testing, before the heads are approved for sale. This keeps your guys committed to quality, and from being in a hurry to turn-n-burn heads out. If the heads don't pass requirements, the porters don't get paid for them, and the heads get reworked until they pass, or they get scrapped. Thats the best way to maintain consistent products in my opinion. Sure, this QC costs more, but its worth it.
Tony
Tony
![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#12
6600 rpm clutch dump of death Administrator
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Jayson has always been a standup guy. He has always taken the time to speak with me when I am in the shop. He has made his dyno avaliable for testing, and he and his staff have been very accomodating for anything I've ever needed help with.
Jayson has done engine packages for several friends. While they may not be "bleeding edge" in terms of some of the max-effort packages out there, they are dead nuts on, they are consistent, and they make good power.
In my group of friends I have never had anyone have a failure on any MTI product or package. Like any shop there have been a few issues with sleeves dropping, etc... But MTI has led the pack there also both in quality, and in customer service in terms of getting those customers back on the road with a minimum of fuss. I know MTI is moving away from pressed sleeves to Darton's to improve the quality of their super stroker kits.
In short I think we can all agree that over the years we have seen MTI come to the top as a leader in the performance market both in product and in customer satisfaction.
Jayson has done engine packages for several friends. While they may not be "bleeding edge" in terms of some of the max-effort packages out there, they are dead nuts on, they are consistent, and they make good power.
In my group of friends I have never had anyone have a failure on any MTI product or package. Like any shop there have been a few issues with sleeves dropping, etc... But MTI has led the pack there also both in quality, and in customer service in terms of getting those customers back on the road with a minimum of fuss. I know MTI is moving away from pressed sleeves to Darton's to improve the quality of their super stroker kits.
In short I think we can all agree that over the years we have seen MTI come to the top as a leader in the performance market both in product and in customer satisfaction.
#16
TECH Fanatic
Join Date: Mar 2002
Location: Your Reality Check Bounced...
Posts: 1,421
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My MTI Heads blew the GTP heads I had out of the water! I think that Jayson himself is one class act individual and it just trickles down. All of their work is top notch, their tuning is 2nd to none, and they 9 out of 10 times have what you need in stock....no waiting.....unless ur going fully built motor or something. When I get another LS1 it's going straight to MTI and having a bore/stroke 383 put in w/their LS6 heads....I've seen so many of those combo's take abuse after abuse after abuse.....and they stand behind their work.
Good Info Jayson....you don't see many if any other shops coming out and laying it on the line....I must say you are one class act individual.
Good Info Jayson....you don't see many if any other shops coming out and laying it on the line....I must say you are one class act individual.
#19
TECH Enthusiast
Join Date: Nov 2001
Location: Orange, TX
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes, my MTI Stage2R's cost more than most of the other options I had back in 2001, but I've had nearly three years and 40k+ of absolutely trouble free miles.
There may be other combos that put out a few more ponies, but not much more. I consider my dyno numbers to be plenty respectable....
The few extra dollars I spent have long been forgotten.
Yes it may sting a little to pay a higher price for good quality, but the sting of poor quality lasts a WHOLE lot longer.
There may be other combos that put out a few more ponies, but not much more. I consider my dyno numbers to be plenty respectable....
The few extra dollars I spent have long been forgotten.
Yes it may sting a little to pay a higher price for good quality, but the sting of poor quality lasts a WHOLE lot longer.
#20
TECH Resident
Join Date: Apr 2003
Location: Tulsa, Ok
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ScottyG
Yes it may sting a little to pay a higher price for good quality, but the sting of poor quality lasts a WHOLE lot longer.
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)