Anyone have pics/specs of the 921 dual springs/titanum retainers
09-23-2011, 07:20 PM
#1
Anyone have pics/specs of the 921 dual springs/titanum retainers Hey guys I need some help. Does anyone have good some good pics of the 921 springs? They don't have to be installed I just need to see what they look like.
Also if someone could measure the thickness of the retainers I would appreciate it too. I have a set of springs/retainers that I'm trying to identify.
Thanks.
Jason
Also if someone could measure the thickness of the retainers I would appreciate it too. I have a set of springs/retainers that I'm trying to identify.
Thanks.
Jason
Last edited by LilJayV10; 09-23-2011 at 10:45 PM.
09-23-2011, 10:40 PM
#2
I checked in the comp catalog and it gives the diameters of the 754 retainer but not the height of it from the top of the retainer to bottom that would contact the guide.
I got one measurement of about .32x I wanted someone else to check one too.
I am going to check the spring pressure/rate of the springs I have tomorrow. I got the pressures/rates for the 921's from Comp's catalog.
Thanks.
I got one measurement of about .32x I wanted someone else to check one too.
I am going to check the spring pressure/rate of the springs I have tomorrow. I got the pressures/rates for the 921's from Comp's catalog.
Thanks.
Last edited by LilJayV10; 09-23-2011 at 10:46 PM.
