Can a over square Turbo motor rev higher ?
#21
TECH Junkie
iTrader: (11)
Just to though in some specs Enzos are 6 liters so not small capacity
they have 650bhp at 7800 and are over square by 22% 92mm x 75.2mm
That's more HP than a LS9.......
Yes I don't know what the turbo motor's going to be like at gaining revs but that's kind of why I'm asking for advice...
Ps here's a video of a similar car 377ci SBC reving to 7800rpm and hitting 100 MPH in 5.6 seconds, and the suspension is designed for a road racing not drag...
I need to beat this that's my main objective.....
http://www.youtube.com/watch?v=OuvBLWciOXs
they have 650bhp at 7800 and are over square by 22% 92mm x 75.2mm
That's more HP than a LS9.......
Yes I don't know what the turbo motor's going to be like at gaining revs but that's kind of why I'm asking for advice...
Ps here's a video of a similar car 377ci SBC reving to 7800rpm and hitting 100 MPH in 5.6 seconds, and the suspension is designed for a road racing not drag...
I need to beat this that's my main objective.....
http://www.youtube.com/watch?v=OuvBLWciOXs
#22
Teching In
Thread Starter
Join Date: Oct 2006
Location: Now living in Alberta Canada....
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
I so far have raised my final drive from 3.44 to 3.1 and have raised 1st gear as well to get a 60mph at 7200rpm, but these Trans-axles are very expensive to modify and there isn't a good Trans that's below say $15K
My Porsche 996TT box has cost me over $13500 so far....