LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Generation III Internal Engine
PTV clearance question

Generation III Internal Engine 1997-2006 LS1 | LS6

Sponsored by:

PTV clearance question

Reply Subscribe

Search this Thread

Old

Jan 11, 2012 | 09:39 PM

#1

Thread Starter

Teching In

iTrader: (3)

Joined: Dec 2010

Posts: 20

Likes: 0

From: philadelphia

Default

PTV clearance question

Just picked up a used cam its a Bullet 234/238 .650/.650 w/ 112 lsa. Im very concerned about the ptv clearance. I plan on running the cam with my ported 241 heads, I know if I deck the heads ill be playing with fire but if I keep the stock deck height and stock head gaskets should I still have enough clearance without having to fly cut the pistons?

Old

Jan 12, 2012 | 12:15 AM

#2

3rdCoastPowerSports

TECH Fanatic

iTrader: (5)

Joined: Jun 2011

Posts: 1,154

Likes: 6

From: Loony Bin

Default

i have the same duration @ .050" 234/238 cam in my car with ported 241's,,, When i measured i had .102" PTV clearance intake and .110" PTV clearance exhaust. min should not be less than .080" intake and .100" exhaust... you should be good to go.

Old

Jan 12, 2012 | 02:14 AM

#3

12 Second Club

iTrader: (49)

Joined: Sep 2005

Posts: 8,139

Likes: 10

From: Chillicothe/Lima, Ohio

Default

Nobody can tell you for sure. Every engine is different. I would check it to be sure, if you don't and crash the valves, that's your own fault.

Old

Jan 12, 2012 | 10:11 AM

#4

Thread Starter

Teching In

iTrader: (3)

Joined: Dec 2010

Posts: 20

Likes: 0

From: philadelphia

Default

thanks 3rdcoast, ill prolly clay a piston just to be sure when it goes in

Old

Jan 13, 2012 | 05:33 PM

#5

TECH Junkie

iTrader: (2)

Joined: Jan 2006

Posts: 3,776

Likes: 0

From: Fort Wayne, IN

Default

Quote:

Originally Posted by jtaylor16

thanks 3rdcoast, ill prolly clay a piston just to be sure when it goes in

Good answer and smart idea.

Reply Subscribe

080, 234238, 241, 650650, bullet, cams, clearance, head, ls1, minimium, minium, ptv

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 05:22 AM.