Engine build question
#1
Banned
Thread Starter
Join Date: Oct 2003
Location: Texas
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Engine build question
I am getting a somewhat forged bottom end built for my car now. I have the pistons and rings and I still need the main and rod bearings and the rods themselves. I am going to use the stock crank with this project and want to kep it as a stock displacement motor.
I have the Diamond pistons size 3.905 and JE rings already
What size rods do I need and does eagle make a set to fit my needs? Im somewhat on a budget here. Also, What bearings should I get?
I have the Diamond pistons size 3.905 and JE rings already
What size rods do I need and does eagle make a set to fit my needs? Im somewhat on a budget here. Also, What bearings should I get?
#2
Senior Member
iTrader: (24)
Join Date: Nov 2001
Location: Tampa, FL
Posts: 6,034
Likes: 0
Received 0 Likes
on
0 Posts
If you already have the pistons, you need to find out what lenght rod they were made for. They change the pin placement depending on the rods. You cant use a pistons made for a 6.125 rod on a 6.100 rod and vise versa.
#3
TECH Enthusiast
What is the part number of your pistons? If you have a catalog handy you can look up the part number and see what rod they were built for. I have a catalog right here if you can post your part# I can tell you the rod to use.
#5
Banned
Thread Starter
Join Date: Oct 2003
Location: Texas
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
I just talked to Diamond and they are telling me its a custom piston and there in no way of telling what rod will be used for them. Does nayone know what the stock rod lenght is?
#6
TECH Fanatic
Join Date: Nov 2001
Location: Kansas City, MO
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
6.10" if I remember correctly. It is actually a hair under that, but for your purposes it should be fine.
3.898" bore
3.622" stroke
6.10" rod
deck averages out about -.005"
3.898" bore
3.622" stroke
6.10" rod
deck averages out about -.005"
#7
Banned
Thread Starter
Join Date: Oct 2003
Location: Texas
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DenzSS
6.10" if I remember correctly. It is actually a hair under that, but for your purposes it should be fine.
3.898" bore
3.622" stroke
6.10" rod
deck averages out about -.005"
3.898" bore
3.622" stroke
6.10" rod
deck averages out about -.005"
So..6.10 is the stock rod size or what the pistons I have call for?