spec me a custom cam...
#21
On The Tree
Thread Starter
Join Date: Mar 2011
Location: jax, fl
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Okay. How can I fly cut without pulling engine? I know the front 3 cylinders on each side may be easy but back may be difficult. Any pointers and tips are appreciated. As far as ptv tolerances what would be safe? Also you stated milling heads more. How much more should I go? Not sure if this makes a difference but I will be putting spray to it. Thanks for all of your help guys.
#22
Old School Heavy
iTrader: (16)
Ls1 stock bottom
Prc 2.5 5.3 heads milled .005
Ls6 intake
Pacesetter lts 3" true duals
3.73s 27" tire
4000lbs
T56
I have a 233/239 .598 .603 on 112* now. I want more low end grunt and make BIG torque and good power under the curve. Can KNOWLEDGABLE cam guys give me a few good choices..I would still like a good thump though.
Prc 2.5 5.3 heads milled .005
Ls6 intake
Pacesetter lts 3" true duals
3.73s 27" tire
4000lbs
T56
I have a 233/239 .598 .603 on 112* now. I want more low end grunt and make BIG torque and good power under the curve. Can KNOWLEDGABLE cam guys give me a few good choices..I would still like a good thump though.