Cam for my bolt on/stall ws6
11-28-2012, 11:23 PM
#23
I'm down to the EPS 226/234 and an Ai 228/236. I know EPS will perform and Phil @ Ai is going to send me some info in the morning on the 228 piece from him.
I plan on running them with a 3600 stall. Should make for a good street car and make good track numbers.
I plan on running them with a 3600 stall. Should make for a good street car and make good track numbers.
11-29-2012, 01:22 AM
#24
Launching!
Thread Starter
iTrader: (1)
Join Date: Apr 2011
Location: sun valley CA
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Im giving eps a call ASAP to gather some more info on there cams and packages and I'm gonna go from there, I was reading that alot of people were breaking into the 400rwhp area with that tsp 228r cam and that's my goal...I want to be at or a little over 400rwhp on my stock 241's because I'm planing on getting some work done on them in the future....I made 359.7 rwhp with just bolt ons and a dynotune so if I can get a cam that wil get me in the power range I want to be then that's what I'm jumping on....I just don't want to get a cam that's too crazy...
11-29-2012, 08:45 AM
#25
Im pretty sure i coulda got 400hp outta it. Geoff said something about what he was seein on the map sensor. Said that the intake,throttle body, MAF are holding it back a bit but theirs definately more in it to be had. Im pretty happy with it at the moment but when im ready i know what needs to be changed
