Finally pulling the trigger on parts!
gotta get this done first haha 
06-27-2013 | 01:58 PM
#230
Thread Starter
Super Hulk Smash
iTrader: (7)
Joined: Aug 2004
Posts: 11,255
Likes: 142
From: Pace, FL
Okay, so my daily driver Nissan needed my attention this week. Needed one car to be operational. Plan to start the swap this weekend.
But, the good news is I had a couple of other things come in.
Founders stuff looks incredible for the price. Got the on-car adjustable panhard bar with Poly ends and LCAs with their 3-piece poly ends.
But, the good news is I had a couple of other things come in.
Founders stuff looks incredible for the price. Got the on-car adjustable panhard bar with Poly ends and LCAs with their 3-piece poly ends.
06-27-2013 | 02:35 PM
#231
Okay, so my daily driver Nissan needed my attention this week. Needed one car to be operational. Plan to start the swap this weekend.
But, the good news is I had a couple of other things come in.
Founders stuff looks incredible for the price. Got the on-car adjustable panhard bar with Poly ends and LCAs with their 3-piece poly ends.
But, the good news is I had a couple of other things come in.
Founders stuff looks incredible for the price. Got the on-car adjustable panhard bar with Poly ends and LCAs with their 3-piece poly ends.
That's the exact same setup I'm running.
06-27-2013 | 02:48 PM
#232
I hear you man! I keep telling myself i'll start next week but something always comes up.. I got everything but pushrods and motor mounts. Hope all goes Smoothly for you .
06-27-2013 | 02:59 PM
#233
Thread Starter
Super Hulk Smash
iTrader: (7)
Joined: Aug 2004
Posts: 11,255
Likes: 142
From: Pace, FL
I ordered the Comp pushrod length checker today. I won't need it until I'm near the end of the swap, so hopefully it'll arrive just in time. Then, I'll order the Manton pushrods. I already sort of know what the size will probably be, but I want to know exactly what my preload is going to be on the Morels.
06-27-2013 | 03:01 PM
#234
Thread Starter
Super Hulk Smash
iTrader: (7)
Joined: Aug 2004
Posts: 11,255
Likes: 142
From: Pace, FL
I got it because of the price. And I have squeaking back there, so instead of just replacing with new bushings, might as well get something that's a big step up in performance without sacrificing ride comfort. Those 3-piece poly joints look like just the ticket.
Plus, I'll be set when I put my 315s back there.
Plus, I'll be set when I put my 315s back there.
06-30-2013 | 08:49 PM
#235
Sounds like a badass build combo....IN for your TEA results; still have yet to
put mine on as all spring I was flooded with roundy round motor builds and
we finally got nice weather up here about a month ago so I can't convince
myself to tear it down yet. Like you once mine goes under the knife I know
I'll create every reason possible to change/upgrade this or that....like that
commercial with the kids.."we want more, we want more, we really like it so
we want more"....
put mine on as all spring I was flooded with roundy round motor builds and
we finally got nice weather up here about a month ago so I can't convince
myself to tear it down yet. Like you once mine goes under the knife I know
I'll create every reason possible to change/upgrade this or that....like that
commercial with the kids.."we want more, we want more, we really like it so
we want more"....
07-02-2013 | 11:53 PM
#236
Thread Starter
Super Hulk Smash
iTrader: (7)
Joined: Aug 2004
Posts: 11,255
Likes: 142
From: Pace, FL
Some fun stuff from CircleD came today! All the tools should be here this week, too. I didn't budget for the tools, dammit!!!
Anyway, the CircleD package is nicely done - very impressed with how it was packed. Chris was very helpful as well and look forward to seeing what the custom 2E does for me (4000 to 4200 stall).
Anyway, the CircleD package is nicely done - very impressed with how it was packed. Chris was very helpful as well and look forward to seeing what the custom 2E does for me (4000 to 4200 stall).