Stealth II soundclip
#21
TECH Addict
Join Date: Mar 2003
Location: Houston, TX
Posts: 2,853
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ulySSes
Link didn't work for me neither.
#22
TECH Senior Member
Thread Starter
Yeah, you have to have quicktime installed to play it.
Sure, I could take another clip showing some revs. Not saying I'll do it today, however.
Sure, I could take another clip showing some revs. Not saying I'll do it today, however.
#23
TECH Addict
Join Date: Mar 2003
Location: Houston, TX
Posts: 2,853
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Colonel
Yeah, you have to have quicktime installed to play it.
Sure, I could take another clip showing some revs. Not saying I'll do it today, however.
Sure, I could take another clip showing some revs. Not saying I'll do it today, however.
#24
11 Second Club
Join Date: Feb 2003
Location: WESLACO, TEXAS
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
Lol
Originally Posted by WILWAXU
damn! I thought my car was dirty
Sounds cool btw
Sounds cool btw
#28
TECH Senior Member
Thread Starter
Strangely, at least one other person reported the cam to lope in their car. I don't doubt their word at all but it does confuse me. I still wonder if my LS6 heads and raised CR (11.1:1) helped me out that much and/or if possibly their tuning was off in some way. Come to think of it, I believe the person I'm thinking about might have had the SSI instead of the SSII. Maybe the 1 degree of extra LSA makes more difference than what I would have thought. I dunno.
I kid you not, this cam sounds even smoother in person than it does on the recording. No shakes, no shimmys. The only way I can get it so that you can plainly tell that there's a bigger cam in there is if I open the cuttout AND lower the idle down to like 525 RPM.
I kid you not, this cam sounds even smoother in person than it does on the recording. No shakes, no shimmys. The only way I can get it so that you can plainly tell that there's a bigger cam in there is if I open the cuttout AND lower the idle down to like 525 RPM.
#30
LS1TECH Sponsor
iTrader: (2)
Originally Posted by Colonel
Strangely, at least one other person reported the cam to lope in their car. I don't doubt their word at all but it does confuse me. I still wonder if my LS6 heads and raised CR (11.1:1) helped me out that much and/or if possibly their tuning was off in some way. Come to think of it, I believe the person I'm thinking about might have had the SSI instead of the SSII. Maybe the 1 degree of extra LSA makes more difference than what I would have thought. I dunno.
I kid you not, this cam sounds even smoother in person than it does on the recording. No shakes, no shimmys. The only way I can get it so that you can plainly tell that there's a bigger cam in there is if I open the cuttout AND lower the idle down to like 525 RPM.
I kid you not, this cam sounds even smoother in person than it does on the recording. No shakes, no shimmys. The only way I can get it so that you can plainly tell that there's a bigger cam in there is if I open the cuttout AND lower the idle down to like 525 RPM.
#32
I have the Stealth II installed and it chops pretty good . Its not like its going to stall but you can hear it , no mistaking its cammed. Its running through Kooks long tubes , catted Y and slp loudmouth. I posted some videos of it a while back.
I love the sound, I didnt buy it to be quiet but to idle smooth inside the car and its great . After install it fired right up , tried to die for about 3 seconds and then just idled away. Ill have track times at the end of the month and some dyno numbers as soon as I get it off jack stands . Im hoping for close to 380 - 390 rwhp
I love the sound, I didnt buy it to be quiet but to idle smooth inside the car and its great . After install it fired right up , tried to die for about 3 seconds and then just idled away. Ill have track times at the end of the month and some dyno numbers as soon as I get it off jack stands . Im hoping for close to 380 - 390 rwhp
#34
TECH Addict
Join Date: Mar 2003
Location: Houston, TX
Posts: 2,853
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by foff667
notice how long it took to get the first clip hold your breath for this one hehe jk
JoeDirt, could you send me that soundclip? Or post it or whatever.
ulysses_nilo@hotmail.com
Thanks
**edit** Nevermind, I found your clip, sounds nowhere near Colonel's car.
Sounds really good though!
Last edited by ulySSes; 04-23-2004 at 08:28 AM.
#36
TECH Senior Member
Thread Starter
Ahh, I see this is the very same cam that loped in the first car I was referring too, Cannibal's brother. I still wonder if this cam is off spec somehow...like maybe they accidentally slipped a C2 in the box instead or something. I doubt it but the mind wonders....
I found your clip but it didn't work for me.
I found your clip but it didn't work for me.
#37
Originally Posted by Colonel
Ahh, I see this is the very same cam that loped in the first car I was referring too, Cannibal's brother. I still wonder if this cam is off spec somehow...like maybe they accidentally slipped a C2 in the box instead or something. I doubt it but the mind wonders....
I found your clip but it didn't work for me.
I found your clip but it didn't work for me.
It has stock heads, Kooks long tubes, kooks catted Y etc and was installed straight up ( checked and double checked) .
Is it possible it was an erlier version with maybe a more aggresive spec ? Because I bought it used I didnt get a cam card .
Ill try to find the vid and post it again. Its not very good, just taken off a digital camera but you can hear it chop
#38
TECH Senior Member
Thread Starter
The SLP Loudmouth has alot to do with it (I didn't notice that's what you had before.) That's almost like an open cuttout. I have the stock muffler.
So what's the idle RPM?
So what's the idle RPM?
#40
Heres a crappy vid. I deleted the ones of it idling from behind but you kind kinda here it lope in this.
http://www3.telus.net/public/a7a74501/stealth2b.mpeg
http://www3.telus.net/public/a7a74501/stealth2b.mpeg