SLP stage 3 heads
SLP stage 3 heads what are SLP stage 3 heads. The guy I got my 2000 t/a from said it has those heads. I asked what that meant clue. I searched google same thing. I asked him what valve springs it had he didnt know but it has the comp cams polluter cam which the stock springs would not support.
Never heard of those heads personally. Let me ask you this...why would by a car with heads that no one has ever heard of? That would be enough to steer me away lol
Just a typical guy that doesn't know what he has, just what someone told him. Look for the 3 digit casting # on the forward top side of the head. Don't beat the guy up, I have know people who didn't know what the "LSx" on their intake meant.
Trending Topics
I think the ported stock castings they sold were Patriots.
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Since I will be tearing into this motor I may be able to identify these heads, anything that I should look out for. Slp did have a stage 3 pkg but didnt include heads. I guess I will find out.
I wasn't trying to sound like a jerk or anything, so I apologize if it came across that way! Yes the casting number on the front passenger side head would be a good start
I can see no casting number on the heads. The valve springs are silver and are dual springs with a silver retainer. I will be taking them off in the next few days so I can check my lifters so I will post some pics, however I cannot find any casting numbers whatsoever! maybe there will be somthing on it.
OK so I found some stampings on the heads! SLP 162 and then 10428. been searching internet. there are cnc marks on the intake runners and have double springs that can support my .610 lift cam.
