Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

anyone running prc 215 heads?

Thread Tools
 
Search this Thread
 
Old 04-25-2013 | 04:19 AM
  #1  
hart7631's Avatar
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: Jun 2009
Posts: 60
Likes: 1
From: tucson
Default anyone running prc 215 heads?

just looking to get some more feedback from you guys before i make a final purchase..it sounds like texas speed sells alot of these but i did alot of research and theres not much info or review on here about them..im looking at purchasing prc 215s and tsunami cam so im trying to see what track times people are getting with this combo, looks like alot of people are getting clost to 500rwhp with full bolt ons and this set up but havent seen anyones feedback as far as track times or drivablity.
Old 04-25-2013 | 11:21 AM
  #2  
VandykeT/A's Avatar
10 Second Club
10 Year Member
 
Joined: Jan 2010
Posts: 2,317
Likes: 20
From: Hurley, VA
Default

My car dyno'd 452 with the MS4 and FAST 102. That was through a hooker catback with 2.25 tailpipes, 11" wheels, 4.10s, stock lower airbox, and it was 98 degrees in the dyno room. Those things could have swung my numbers low but the car traps 122 in 3k feet after a CHRS1313 and 4" exhaust. I do think my tune is off now. My wideband shows rich. Driveability isn't bad but it isn't stock.




All times are GMT -5. The time now is 04:29 PM.