Pics Of My Advanced Induction Dart/RHS 223cc Heads/Build Thread
#41
I'll be curious to see how they do. I send anywhere from 15 up to 30 sets of stock casting to A.I. per yr and have recently been looking at some more budget minded aftermarket castings as another option. You can only do a 241 or 243 headed engine so many different ways.
Dart put such a bad taste in my mouth when they first hit the seen. A few yrs ago I used 1 set of "out of the box" castings that made "8" (read again, EIGHT) more HP than a stock untouched 241 cyl head. Needless to say I was very disappointed and the owner of the vehicle was livid.
I'll be looking for those results.
Dart put such a bad taste in my mouth when they first hit the seen. A few yrs ago I used 1 set of "out of the box" castings that made "8" (read again, EIGHT) more HP than a stock untouched 241 cyl head. Needless to say I was very disappointed and the owner of the vehicle was livid.
I'll be looking for those results.
#49
Wanted to update this thread. Dropped the car off last night at my builder's shop. He will be installing the AI heads, Accel 44lb/hr injectors and Monster Stage 3 Clutch Kit w/ Tick Performance Hydraulic Cylinder. He will also re-tune the car once all the parts are on. In addition, he's going to install upgraded rod bolts in preperation for me adding Nitrous down the road.
#56
Are you resizing the rods for the ARP bolts?
#58
#59
Super Hulk Smash
iTrader: (7)
They both *may* require resizing. By the time you buy and resize Katech rod bolts, you can just about buy some Scat I-Beam rods with 9/16" APR cap screws.
With an 02, I'd not worry with it. And I thought long and hard and decided against it because I have an 02 as well.
With an 02, I'd not worry with it. And I thought long and hard and decided against it because I have an 02 as well.