AFR 215cc
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
AFR 215cc
is there anyone running AFR 215cc heads on a stock displacement LS1? idk if the 215cc afr heads are too much for stock or not. im between the 210cc and 215cc....for that matteris there anyone on here running the 210cc? id like to hear reviews on both heads for stock cube LS1s. I will also be changing my cam and putting one in speced by tony mamo or pat g. I am also running a ported fast 92/92 intake with 98mm lid and 85mm TB. one more thing that u guys will find usefull for my inquiry, my car is not daily driven and it is a street car with a bit of track time in the summer. any info helps, thanks everyone.
#2
TECH Resident
iTrader: (4)
That's one of the first things I asked Tony. I ended up going with the 215s on my 347 - from what I'm told they are definitely not too much for stock displacement. they maintain the port velocity of a smaller head but have a bit more of the top end flow capacity of a larger port. just an fyi - they have larger chambers than what would be normal on a 3.9xx bore, which means you have to run at least a 4.135" gasket.
From our PM's..
The 215s at least to me seemed like a no brainer - better on a stock displacement and also provides you with room to grow if you decide to add cubes. I'd PM the man though and get it from the horse's mouth.
From our PM's..
Originally Posted by ckpitt55
As far as the 215's go - do they offer any advantages aside from more breathing room up top over say the 210's, which seem to have been designed for my application (3.90x bore, explosive/torque oriented build), at least judging by the description on AFR's site? Also with the 215's and the larger bore gaskets they require, does that extra volume above the cylinder cause an measurable change in the cylinder fill characteristics? I've always thought of that land area as a "burr" in the airflow path, but again I'm no expert - just curious. Would like to hear your thoughts on that.
Originally Posted by Tony Mamo
The 215's I rework will effectively give you the bottom end of the small heads and the top end of a head larger than 215....its the have your cake an eat it too scenario. The larger chamber actually unshrouds the valves....its a good thing...the air can negotiate around the small lip at the deck but if the valve is against the wall there certainly won't be any additional flow to take advantage of. While a big bore is even better to capitalize on the unshrouded chamber, an unshrouded chamber with a small bore still flows more than a shrouded chamber with a small bore....you follow me here?!
Last edited by ckpitt55; 06-18-2013 at 11:45 PM.
#3
Super Hulk Smash
iTrader: (7)
Tony pointed me to the 215 as well. However, for the price, I think you can do better. No knock against Tony, it's just the truth. He steers you to the 215 and his "Mamofication process" and that makes it like $1000 more than TFS 215 heads. And I'm still not sure Mamofied 215s are any better than TFS 215s.
I went with TEA Stage 2 LS6 heads, because, hand ported, they are a notch above TFS 215s for less less money. That seemed like a better investment to me.
I went with TEA Stage 2 LS6 heads, because, hand ported, they are a notch above TFS 215s for less less money. That seemed like a better investment to me.
#4
Staging Lane
Join Date: Jan 2012
Location: CHristchurch New Zealand
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Im running out of the box 210's on my setup, they are bad *** on a 346, having said that if i were to do it again i'd go 215's, more room for movement in the future if you wanted more cubes, im now faced with buying a set of mamofied 245's for my next mission as i need more head (constant problem), cause the 210's aren't big enough for what im currently building
#5
TECH Enthusiast
Join Date: Dec 2005
Location: Owasso,Ok/Honolulu, HI
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
Granted I am running a 102/102 setup, but I think the numbers from my PRC 215's speak for themselves. Not sure what difference the AFR's would make, but a 215 is definitely not too much head for stock displacement.
#6
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Right on guys, thanks for the info. What kind power are u guys making with the 215s? What exactly does the mamofication process include? Some special porting I'm guessing? Anyway I plan on having tony spec me a cam for max power without losing too much drivability. Right now I am running 2.5 LS6 heads with a 235/240 111LSA cam and its just not quite cutting it for me. I also picked up a black ported fast92/92. So Im hoping for some good results. Car is at 427rwhp on mustang dyno and runs 12.1@116 with sticking clutch pedal. Still trying to decide whether or not to pickup a 383 rotating assembly. Eh I dont know. We will see
Trending Topics
#9
Super Hulk Smash
iTrader: (7)
Mamofied is hand porting basically. He cleans up the CNC and touches a few places without opening up the port more to get another 8-10cfm of flow. Then lighter valves are installed. Basically, it's what I did on my 243s.
Good things all, but at some point, you have to decide if the money invested is worth it. Starting with 243s + CNC + Hand work + hollow-stem LS3 valves is a lot less money than starting with an AFR casting + CNC + hand work + hollow-stem valves.
Good things all, but at some point, you have to decide if the money invested is worth it. Starting with 243s + CNC + Hand work + hollow-stem LS3 valves is a lot less money than starting with an AFR casting + CNC + hand work + hollow-stem valves.
#12
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Mamofied is hand porting basically. He cleans up the CNC and touches a few places without opening up the port more to get another 8-10cfm of flow. Then lighter valves are installed. Basically, it's what I did on my 243s.
Good things all, but at some point, you have to decide if the money invested is worth it. Starting with 243s + CNC + Hand work + hollow-stem LS3 valves is a lot less money than starting with an AFR casting + CNC + hand work + hollow-stem valves.
Good things all, but at some point, you have to decide if the money invested is worth it. Starting with 243s + CNC + Hand work + hollow-stem LS3 valves is a lot less money than starting with an AFR casting + CNC + hand work + hollow-stem valves.
#13
TECH Enthusiast
Join Date: Dec 2005
Location: Owasso,Ok/Honolulu, HI
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
If you are going to have the motor apart, then why not do the 383 if you can drop the cash for it? I wish i would have done that now, but it is too late for that for me.
#14
TECH Resident
iTrader: (4)
At that point you're almost better off buying a 383 shortblock already preassembled, slap on your top end when you're ready, and go.
All of that aside, I must say I'm pretty tempted to do a 383 - I'm more than half way there - already have the 3.905 bore, all I'd have to do is swap out the crank, pistons, and cam. Maybe if I ever get bored with this setup I'll do that.
Last edited by ckpitt55; 06-20-2013 at 02:06 AM.
#15
Super Hulk Smash
iTrader: (7)
If the PtV is too close (and it will be close), I'm going to send to Tooley, flycut, and have Geoff spec me something like a 234/242 cam... the see if I can get close to 500rwhp in an A4.
#16
TECH Fanatic
swapping heads and intakes is a lot simpler than tearing apart the shortblock - you open up pandoras box when you tear into that. I wouldn't do it unless you're prepared for a full on rebuild - there's a lot of cost / time involved in doing it right. if you're starting from a 346, it's going to be about 3k in parts and machining just to get the 383 in there (think crank, rods, pistons, rings, bearings, torque plate hone, balance assembly, and anything else the block needs - along with a crap load of other things you can justify with "while I'm in here"). That doesn't include any setup / assembly work.
At that point you're almost better off buying a 383 shortblock already preassembled, slap on your top end when you're ready, and go.
All of that aside, I must say I'm pretty tempted to do a 383 - I'm more than half way there - already have the 3.905 bore, all I'd have to do is swap out the crank, pistons, and cam. Maybe if I ever get bored with this setup I'll do that.
At that point you're almost better off buying a 383 shortblock already preassembled, slap on your top end when you're ready, and go.
All of that aside, I must say I'm pretty tempted to do a 383 - I'm more than half way there - already have the 3.905 bore, all I'd have to do is swap out the crank, pistons, and cam. Maybe if I ever get bored with this setup I'll do that.
#18
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
I am kind of on a budget here. At this point if I do anything to the internals it would prolly only be H-beam rods and valve relief pistons. These stock cranks Are supposed to be good for a lot of power so maybe I could either find a stock gm rank that will make my 383. Or even find an LS2/3 in a junkyard and just make that my h/c car. I don't have my def plans yet but I could either go with a smallish cam with the AFR 215cc heads and mamo 102. Only problem with 102 is I just bought a ported 02 from another vendor plus the fast 90 I also have I don't wana go the 102 route unless I can sell both my fast intakes in favor of a mamo 102. There are just too many variables at this point. Tony and I have alottp work out in order to find my perfect combo. Honestly. I have been seeing 346 ls1 engines up in the 480-490rwhp range with the afr 215, mamo 102 and custom cam. And that is exactly what I want.
#19
TECH Apprentice
iTrader: (1)
Join Date: Mar 2009
Location: LA
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
I know what it feels to be undecided to stroke or not to stroke, when I was building my LS1 i knew I wanted some heads and rods and pistons for some nitrous, but for all that work why not a crank as well and maybe leave out the nitrous, but once I started buying parts I coudnt stop, ended up with a 383,215 afr, 92 fast, raptor cam, made only 481rwhp, sent heads to get worked on 498rwhp, and 150 shot, could have made more I think on the tune but rather stay safe than to drive on the edge
#20
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
I know what it feels to be undecided to stroke or not to stroke, when I was building my LS1 i knew I wanted some heads and rods and pistons for some nitrous, but for all that work why not a crank as well and maybe leave out the nitrous, but once I started buying parts I coudnt stop, ended up with a 383,215 afr, 92 fast, raptor cam, made only 481rwhp, sent heads to get worked on 498rwhp, and 150 shot, could have made more I think on the tune but rather stay safe than to drive on the edge