Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

A little help with the cam part numbers, please

Thread Tools
 
Search this Thread
 
Old 08-06-2013 | 04:35 PM
  #1  
TEXAST1's Avatar
Thread Starter
Teching In
 
Joined: May 2006
Posts: 8
Likes: 0
From: Plano Texas
Default A little help with the cam part numbers, please

I could use some help on finding these numbers. These were in my tool box. I used to buy engines from Bob Herbers with GM Racing. I thought these were the "Stock LS6 Cams" that cam in the engines. However, I cannot find cam information on either cam.

Cam #1:

0964
4 19
8295

Cam #2:
4710
3
5348

I know the production cam numbers are 5308, but I cannot find anything on these.

A little help please.
Old 08-06-2013 | 11:00 PM
  #2  
2xLS1's Avatar
TECH Senior Member
20 Year Member
iTrader: (25)
 
Joined: Nov 2001
Posts: 5,649
Likes: 8
From: Warr Acres, OK
Default

Cam #1
1997-1999 Corvette
Lift I/E .472/.479
Dur @.050 199/207
LSA 117
Timing 121/113
Part Number 12560964
Old 08-07-2013 | 07:55 AM
  #3  
TEXAST1's Avatar
Thread Starter
Teching In
 
Joined: May 2006
Posts: 8
Likes: 0
From: Plano Texas
Default

Thanks 2xLS1. I looked through Thunder and did not see it, maybe just wasn't seeing clearly.

That makes sense since my car is a 1999. So, the second is still an unknown. I have had several LS1s and LS6s in that car over the years.
Old 08-07-2013 | 04:44 PM
  #4  
2000PewterT/A's Avatar
TECH Fanatic
 
Joined: Jul 2011
Posts: 1,074
Likes: 1
Default

Originally Posted by TEXAST1
Thanks 2xLS1. I looked through Thunder and did not see it, maybe just wasn't seeing clearly.
There is a reason you didn't find it if your talking about Thunder Racing... If that's what you meant by Thunder, Once Geoff left it went bye bye.
Old 08-07-2013 | 07:11 PM
  #5  
TEXAST1's Avatar
Thread Starter
Teching In
 
Joined: May 2006
Posts: 8
Likes: 0
From: Plano Texas
Default

Originally Posted by 2000PewterT/A
There is a reason you didn't find it if your talking about Thunder Racing... If that's what you meant by Thunder, Once Geoff left it went bye bye.
Yes, I was, that was the reference many pointed to. At least I know.



Quick Reply: A little help with the cam part numbers, please



All times are GMT -5. The time now is 07:37 AM.