243 intake and exhaust volume's before and after porting diy head porting
#121
11 Second Club
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I never CC'd mine but was told by Mike that they were around 222ish and
the exhaust port shape appears stock D shaped and the cutter just barely
touched the casting. The EX seat appears to be a radius and the flow #s are
with a pipe which I think is about 20 cfm. My self modded 241s with the GM
valvejob flowed 200 w/o and 220 w/pipe @ .600"
the exhaust port shape appears stock D shaped and the cutter just barely
touched the casting. The EX seat appears to be a radius and the flow #s are
with a pipe which I think is about 20 cfm. My self modded 241s with the GM
valvejob flowed 200 w/o and 220 w/pipe @ .600"
#123
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
THANKS FRIENDS
dAVE 408 666 9928
![](http://img.photobucket.com/albums/v236/xr8ted/Mobile%20Uploads/9D0B7112-3F20-4E0A-BCB5-348B74AC1C08_zps5qyp7w0y.jpg)
![](http://img.photobucket.com/albums/v236/xr8ted/Mobile%20Uploads/D4D08431-EC5D-4DBD-B919-D46A16A7FA2E_zpsfamadbxo.jpg)
![](http://img.photobucket.com/albums/v236/xr8ted/Mobile%20Uploads/E433C83F-F0CA-4928-8E67-42ED103DC81E_zpsfackzbzw.jpg)
![](http://img.photobucket.com/albums/v236/xr8ted/Mobile%20Uploads/1AE5E90B-98BE-4A3C-B71C-CB6B5DDFA663_zpstcpebfo8.jpg)
![](http://img.photobucket.com/albums/v236/xr8ted/Mobile%20Uploads/FA8AFE67-38B2-4A2E-AC03-F0AB4645FF76_zpskpqjvitc.jpg)
![](http://img.photobucket.com/albums/v236/xr8ted/Mobile%20Uploads/D5863029-93D6-4412-B7EE-45AFD27D60F2_zpsjrwceh6z.jpg)
![](http://img.photobucket.com/albums/v236/xr8ted/Mobile%20Uploads/FCD7F613-BBE4-40D5-A94A-48757B5BC97B_zpsafvoakp4.jpg)
![](http://img.photobucket.com/albums/v236/xr8ted/Mobile%20Uploads/843932D2-A103-4CDB-8C21-5FBFEB1A41EB_zpsjmfeb7zj.jpg)