Valvetrain issue I need help bad
#27
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Apr 2012
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
ok guys. not only did it carry the rpms out with the new lifters it picked up more horse power and reved all the way to 7600. peaked at 7000 and carried all the way to 7600 and could have went more rpms. just remember PAC 1208X SPRINGS AND LS7 LIFTERS DONT WORK FOR ME.
#29
LOL. You dont know what the real problem is. You guys in red have been spewing way to much bs on tech for the last few years. Its not the ls7 lifters fault lol. Why on earth would you believe you need 165 lbs on the seat for a measly 7000 rpm give or take? Yep the short travel lifters saved the day.
#30
TECH Fanatic
iTrader: (7)
Join Date: Dec 2011
Location: Tampa-ish
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
LOL. You dont know what the real problem is. You guys in red have been spewing way to much bs on tech for the last few years. Its not the ls7 lifters fault lol. Why on earth would you believe you need 165 lbs on the seat for a measly 7000 rpm give or take? Yep the short travel lifters saved the day.
Well, where were you when the guy needed help?
You come in here after the fact, and start talking ****. Very helpful.
#31
LOL. You dont know what the real problem is. You guys in red have been spewing way to much bs on tech for the last few years. Its not the ls7 lifters fault lol. Why on earth would you believe you need 165 lbs on the seat for a measly 7000 rpm give or take? Yep the short travel lifters saved the day.
Think my first post on here was change the lifters too, obvously that didn't work did it