Time serted entire block, alum shavings on cam/ water jackets
11-08-2014, 11:28 AM
#1
Teching In
Thread Starter
Join Date: Jan 2014
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Time serted entire block, alum shavings on cam/ water jackets Long story short,
Time serted all 20 head bolt holes on my LS6 alum block.. I did my best to tape everything off but somehow managed to get a few shavings into the cam area and water jackets.....
Motor is OUT of the car..
What should I do?
Drop oil pan and flush with engine flush a few times until i feel comfortable?
Remove cam and clean?
I have one head currently torqued, and the other side is still off when I noticed it upon inspection.
Time serted all 20 head bolt holes on my LS6 alum block.. I did my best to tape everything off but somehow managed to get a few shavings into the cam area and water jackets.....
Motor is OUT of the car..
What should I do?
Drop oil pan and flush with engine flush a few times until i feel comfortable?
Remove cam and clean?
I have one head currently torqued, and the other side is still off when I noticed it upon inspection.
