New Product Launch....Mamo Motorsports 235 cc
05-19-2016, 09:01 AM
#101
Staging Lane
iTrader: (1)
Join Date: Mar 2015
Location: Boston Ma
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
MMS 235cc NFI with hand finishing Hey guys, I had Tony send me a set of these heads for my 416 build about 6 months ago for an all out S10 build. Mamo ported 102, Mamo specc'd cam, Johnson lifters, etc etc. The only thing I probably skimped on was the powerbond underdrive pulley.
It made 660/590 on the dyno after the break-in cycle.
It made 660/590 on the dyno after the break-in cycle.
05-19-2016, 09:35 AM
#102
Hey guys, I had Tony send me a set of these heads for my 416 build about 6 months ago for an all out S10 build. Mamo ported 102, Mamo specc'd cam, Johnson lifters, etc etc. The only thing I probably skimped on was the powerbond underdrive pulley.
It made 660/590 on the dyno after the break-in cycle.
https://youtu.be/7a6br7-gy7Q
It made 660/590 on the dyno after the break-in cycle.
https://youtu.be/7a6br7-gy7Q
Last edited by josh4ku; 05-19-2016 at 10:27 AM.
05-19-2016, 09:31 PM
#105
Staging Lane
iTrader: (1)
Join Date: Mar 2015
Location: Boston Ma
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
I'm also wondering what an Edelbrock proflow or Holley high ram would do to the curve. It might be better to lose some on the bottom to gain up top, maybe even go with a LLSR if it's worth it.