redbird555

iTrader: (14)

Hey guys so I picked up these YT's pretty cheap for my setup. Guy said a couple made valve cover contact for a little which shouldnt be a big deal. I'm not really worried about it because none of the dings go very far into the aluminum but still wondering what you all think. Car is going to have the stock cam in it just larger pushrods and better springs for the rockers so nothing crazy going on.

These are 2 different rocker assemblies. The one looks like it made friends with the vc causing the top nicks. While th other almost looks like the pushrod length got messed up and came out of the cup?





Both are just surface stuff neither nick goes deep into the metal. I dont think I have a good reason to NOT run them as I see people but these on all the time, relaize they hit, readjust and go again lol rockers have about 12k on them as they sit

blk00ss

iTrader: (66)

I wouldn't run those. The PR cups are notorious for coming out on the older yells Terra's. No way I would trust those.

redbird555

iTrader: (14)

these are the newest style but ya im still unsure of it

MuhThugga

That one is really chewed up. I wouldn't run those, either.

redbird555

iTrader: (14)

going to bring them by vinciperformance since hes local to me and see what he thinks. but ya i dont think im going to run them as is. i might bbe able to just replace these 2 all the others are fine

JakeFusion

iTrader: (7)

I wouldn't run. Like I said in my text, that looks like ****.

The issue is once you break the surface like that, you create a stress point.

redbird555

iTrader: (14)

contacted the seller and while he didnt seem to thrilled about it they're going back. going to order a new set from ws6store this week

blk00ss

iTrader: (66)

Did he disclose the defect before you bought them?

redbird555

iTrader: (14)

the contact on the top of the valve cover i knew about but honestly thats not that bad and lots of rockers get that from a bad install and are fine. the pushrod i did not know about and thats what worried me since thats a really high stress area.

Tony @ Mamo Motorsports

I may have them in stock.....PM me for details

I wouldn't want them purely cause the truth about them wasn't disclosed (conveniently).....that kind of stuff just really rubs me the wrong way.

-Tony

redbird555

iTrader: (14)

pm'ed tony and hes going to get me quote for a new set, these are going back monday and as soon as the refund comes back (should be wednesday) i'll get a set from him. pending he can get them

vettenuts

iTrader: (4)

Is it the top view photo, or is one of the rockers an offset (not LS1) rocker. Maybe it is just my old eyes too!

HioSSilver

iTrader: (8)

I wouldn't worry about it a whole lot. I would take a cookie and polish out the damage and if there was no cracks it should be fine.