98 Trans am using 317 heads what do i need??
#41
TECH Apprentice
Thread Starter
Join Date: Aug 2008
Location: Greensboro NC or Miami Fl
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well as far as the power steering leak it turned out to be a loose not that goes to the power steering reservoir and tighten that up and I'm going to put in some power steering fluid today hopefully when I get out of work at 11
#43
TECH Apprentice
Thread Starter
Join Date: Aug 2008
Location: Greensboro NC or Miami Fl
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Have ran the car and well runs great runs warmer then the stock head according to my sensor. I would like to bring up something for the PCV routing do i have to still tee of the valve for the driver side and passenger side because i dont see any openings for the passenger side
#44
TECH Apprentice
Thread Starter
Join Date: Aug 2008
Location: Greensboro NC or Miami Fl
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Is there ant hose that goes to the passenger side valve cover on the 317 heads because i know that the stock heads were teed off on the passenger side valve cover
#45
TECH Apprentice
Thread Starter
Join Date: Aug 2008
Location: Greensboro NC or Miami Fl
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bump so drove the car for a bit runs amazing i guess there no opening on the passenger side valve cover. Just ran into more bad luck my rear tires are gone
#46
TECH Apprentice
Thread Starter
Join Date: Aug 2008
Location: Greensboro NC or Miami Fl
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bump so drove the car for a bit runs amazing i guess there no opening on the passenger side valve cover. Just ran into more bad luck my rear tires are gone