When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking for instructions on these, my box came from Co Speed totally bare. I'm not sure if I am supposed to clean and soak them em or just lube the wheels and put them in.
Blow them clean then roller the wheels submerged in oil to start breaking up the shipping grease. That's what I was instructed to do. When I installed, I coated with oil and coated the cam lobes with Redline Assembly Lube.
One other caution, I found the plunger in the Morel lifter moved very easy when they are new. So if measuring for a pushrod length you have to be very careful you don't depress the plunger while measuring.