New build coming soon...
New build coming soon... Tell me what you guys think of the parts list. This will be going on my 1998 camaro z28 1le. Its on a 10 bolt with 3.90's and a mcleod twin disk clutch. Everything will be bolted to my 382 ci ls1 equipped with a forged scat crank, je -2cc pistons, amd eagle rods. Currently running the heads/ cam combo listed in my sig. Just know i have alot more in my set up.
Prc 225 as cast heads
62cc
Stainless valves
Tsp dual .660 lift springs
7.475 pushrods
Melling high volume oil pump
Custom grind stroker cam 240/248 .615/.615 114+4 lsa
98mm ftp lid
Delphi 85mm maf
Ls6 intake and stock throttle body
60lb injectors and fuel pump
What numbers would you say are feasible with this set up? Anyone else running something similar?
Prc 225 as cast heads
62cc
Stainless valves
Tsp dual .660 lift springs
7.475 pushrods
Melling high volume oil pump
Custom grind stroker cam 240/248 .615/.615 114+4 lsa
98mm ftp lid
Delphi 85mm maf
Ls6 intake and stock throttle body
60lb injectors and fuel pump
What numbers would you say are feasible with this set up? Anyone else running something similar?
Last edited by pozesd99'; Aug 30, 2016 at 02:34 AM.
It will eventually get a 102/102 set up. Currently not in the budget. Im building my camaro and my gf's camaro at the same time lol. Currently have hooker 1 3/4 heads, 3in y pipe into a 4in flowmaster merge. It then dumps at the 4in i pipe.
Im hoping to hit 460-490rwhp... Currently car makes 420rwhp but has an amazing torque curve! Currently on shitty heads/ cam and stock maf and stock lid
Im hoping to hit 460-490rwhp... Currently car makes 420rwhp but has an amazing torque curve! Currently on shitty heads/ cam and stock maf and stock lid
TECH Addict
Joined: Jul 2013
Posts: 2,189
Likes: 123
From: Portland, Oregon
I think you are probably close to maxing out the LS6 intake's capabilities, to be honest. I think it will choke before you reach the end of your new cam. The new lid should definitely help, but the sooner you can step up to the Fast 102/102, I think you will really see what those heads and cam have to offer. I think to reach the higher end of your goals you may need dual exhaust.
Someone on here did the math and test to prove that a good single 4in merge was just about as efficient as a dual 3in x pipe... Plently of people make lots of power with them.
Is there a cheaper intake manifold that throttle body that would work better? I can justify $1200 for maybe 20rwhp
Is there a cheaper intake manifold that throttle body that would work better? I can justify $1200 for maybe 20rwhp
Trending Topics
I would also measure for the pushrods instead of going with what a vendor recommends. They're usually close, but I found that I needed longer ones to get the most out of my setup. Should be great once you're all said and done!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thanks guys! Parts should be showing up today! Damn ups man needs to hurry up!
I do plan on tsp 1 7/8 headers and a fast 102/102 maybe around tax season to really wake her up!
I do plan on tsp 1 7/8 headers and a fast 102/102 maybe around tax season to really wake her up!
Last edited by pozesd99'; Aug 30, 2016 at 02:28 AM.
You know what I'd do instead of the Fast 102 and bigger headers?? Get a basic nitrous kit and make 5 times that power 
Seriously, for like half the cost of the headers and Fast combined you could have WAY more power. Just a thought....
Seriously, for like half the cost of the headers and Fast combined you could have WAY more power. Just a thought....