Hot Cam 
Hot Cam
On The Tree
Joined: Feb 2004
Posts: 109
Likes: 0
From: Edmond,OK
well I gained 32rwhp un-tuned(it still is) but that was with a LS1 intake, no pulley, no ported TB, and no LS6 intake, I also have a 12 bolt and that robs a little, but I put down 370rwhp and 368 rwtq, now I have a ported TB and getting an LS6 intake on next week, so with that stuff and a pulley and tune I expect 410rwhp, thats 20rwhp from TB, and intake, and 20rwhp from pulley and tune, and I will be dynoing on the 10th of July and we'll see the gains from the intake and TB!
Trending Topics
Launching!
Joined: Nov 2002
Posts: 209
Likes: 0
Originally Posted by Ventura
Any issues with idle/hot start problems without the tune?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by avezz28
You will experience occasional dying and surge untuned. I strongly suggest long tube headers and tuning. All I have is this cam tuned with headers and an ftra airlid and I am trapping 115mph.
John
TECH Enthusiast
iTrader: (10)
Joined: Aug 2002
Posts: 720
Likes: 1
From: Arlington, TX Congestion City
Originally Posted by MikeB.RamAir
well I gained 32rwhp un-tuned(it still is) but that was with a LS1 intake, no pulley, no ported TB, and no LS6 intake, I also have a 12 bolt and that robs a little, but I put down 370rwhp and 368 rwtq, now I have a ported TB and getting an LS6 intake on next week, so with that stuff and a pulley and tune I expect 410rwhp, thats 20rwhp from TB, and intake, and 20rwhp from pulley and tune, and I will be dynoing on the 10th of July and we'll see the gains from the intake and TB!
Good luck man. I doubt you will see 410 out of it. But I'll say a prayer for ya
Either way that is some good numbers from that hotcam. 
TECH Enthusiast
iTrader: (10)
Joined: Aug 2002
Posts: 720
Likes: 1
From: Arlington, TX Congestion City
Nah I got an a4 but not the hotcam. Man you should look into a torque converter. It is the best mod you can do for an a4. TCI SSF3500 would be an excellent choice for you.