darton sleeved 427 ls1
#1
darton sleeved 427 ls1
pressurizing cooling system pushing out coolant when worked hard put new gaskets in for the darton sleeves resurfaced heads still same problem .Old gaskets did not look bad.I think the deck with the sleeves is the problem any thoughts thanks
#2
ModSquad
iTrader: (6)
Who did the sleeve work? MID or dry sleeve? What gasket are you trying to use?
#3
Read Post #27 and there is a little more on farther into the thread about subject, I think
Steve or somebody also recommended putting some of the GM coolant tabs in the
cooling system. Good Luck with that. Heres a link https://ls1tech.com/forums/generatio...st-page-2.html
added another link, good stuff in there. https://ls1tech.com/forums/generatio...5ci-build.html
Steve or somebody also recommended putting some of the GM coolant tabs in the
cooling system. Good Luck with that. Heres a link https://ls1tech.com/forums/generatio...st-page-2.html
added another link, good stuff in there. https://ls1tech.com/forums/generatio...5ci-build.html
Last edited by slogo; 05-25-2017 at 05:28 PM.